587940
18
Zoom out
Zoom in
Previous page
1/72
Next page
REMKO
WARMTEPOMP-MANAGER
MULTITALENT & MULTITALENT PLUS
Verwarmingscircuit 1/2-Vervolg
Omschrijving Waardebereik Fabrieksinstelling Beschrijving
T-aanv const T 10°C-110°C 35,0°C
Deze functie is pas actief nadat de HK-functie op T-aanv
const in het Specialistenmenu is geprogrammeerd
Instellen van de gewenste aanvoertemperatuur, waarmee het
geselecteerde verwarmingscircuit in de verwarmingstijd moet werken
T-aanv const N
10°C-110°C 10,0°C
Deze functie is pas actief nadat de HK-functie op T-aanv
const in het Specialistenmenu is geprogrammeerd
Instellen van de gewenste aanvoertemperatuur, waarmee het
geselecteerde verwarmingscircuit in de verlagingstijd moet werken
Invloed ruimte
Uit
00-20
Uit
Deze functie is alleen actief bij de analoge afstandsbediening
(FBR-2)
De temperatuur van de warmtegenerator (WE) wordt
met de hier ingestelde waarde verhoogd, als de gewenste
kamertemperatuur (T-kamer Richt) met 1K wordt onderschreden
(invloed kamersensor)
Verwarmingscurve
Adaptatie
Aan/Uit Uit
Automatische regeling van de verwarmingscurve
(Verwarmingscurve-adaptatie).
Startcondities:
Buitentemperatuur<C
BedrijfsmodusisAutomatisch1/2
Duurvandeverlagingsfaseisminimaal6uur
Aan het begin van de verlagingstijd wordt de heersende
kamertemperatuur gemeten. Deze temperatuur wordt in de
volgende 4u als richtwaarde voor de kamerregeling gebruikt. Op
basis van de in deze tijd door de regeling berekende waarden voor
de aanvoer-richttemperatuur en de buitentemperatuur wordt de
verwarmingscurve berekend.
De instelling blijft zolang ingeschakeld tot de adaptatie succesvol
is afgerond en niet werd onderbroken (bijv. doordat een extern
verwarmingscircuit warmwater heeft afgeroepen).
Tijdens de adaptatie zijn de warmwaterbereiding van de regeling
en de opwarmoptimalisatie geblokkeerd.
Opwarm Opt
Uit
T-Kamer
T-buiten
Uit
Automatische vervroeging van het begin van de
verwarmingstijd
(opwarmoptimalisatie).
De verwarming wordt afhankelijk van het weer (T-buiten)
of de actuele kamertemperatuur (T-kamer, alleen als een
analoge afstandsbediening (FBR-2) is aangesloten) zo vroeg
aangezet, dat de woning aan het begin van de ingestelde
verwarmingstijd (zie tijdprogramma Verwarmingscircuit
1/2 Prog 1/2) de ingestelde kamerrichttemperatuur
(T-kamer Richt) net heeft bereikt.
De verwarmingsoptimalisatie vindt alleen dan plaats als de
verlagingstijd van het verwarmingscircuit tenminste 6 uur
bedraagt.
Niveau 4 - GEBRUIKER - Beschrijving van de parameters en instelwaarden - Vervolg
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO CMF160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO CMF160 in the language / languages: Dutch as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info