587883
16
Zoom out
Zoom in
Previous page
1/20
Next page
16
Initial Operation of the
Forced – Air Burner
Preparation
After loosening the 4 housing bolts, remove the mount-
ing base plate of the housing so that it is suspended to
the side.
There are 6 housing bolts to disassemble for the SL 44
model (look for the arrows).
The operating parts are immediately accessible and can
now be serviced.
To service, insert or replace the nozzle, the base plate
must be suspended horizontally by hooks.
Proceed as follows:
1. Hold base plate horizontally.
2. Push right-hand mounting laterally into hook device.
3. Hook left-hand side into the lug.
Setting ignition electrode and device
D
C
B
A
All measurements are approx. values in mm. The opti-
mum setting must be adjusted to local and structural re-
quirements.
size \ dimension A B C D
SLV 11 und 33 2 - 4 4 - 6 7 2,5
SL 44 13 - 15 12 - 14 5 3
Required nozzle sizes
Selecting the required oil nozzle depends on the pump
pressure and the unit capacity.
You may only use an oil nozzle that is suitable for the
shape of the respective burner chamber with a corre-
sponding spray angle, cone properties and throughput.
You can find the required oil nozzle sizes under Techni-
cal Data.
Air slide plate
The adjustable air slide plate is used to adjust the
burner pressure to the amount of resistance in the com-
bustion chamber and the chimney draught without hav-
ing to make changes to the original cross-section.
1. Loosen socket screw.
2. Turn air slide plate to desired setting.
Pay attention to the arrows.
Turn to “min = reduced burner pressure
Turn to “max = increased burner pressure
Base plate
After changing the nozzle and setting the air slide plate,
reassemble the base plate in the reverse order.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO CLK50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO CLK50 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO CLK50

REMKO CLK50 User Manual - German - 20 pages

REMKO CLK50 User Manual - Dutch - 16 pages

REMKO CLK50 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info