587583
20
Zoom out
Zoom in
Previous page
1/32
Next page
Connection of quick-
release couplings
The refrigerant pipes should be
connected by the customer on the
right-hand side of the outdoor
component.
The pre-filled refrigerant pipes
are connected to the outdoor
component by means of the quick-
connector system. Once installed,
the connections must be insulated
to prevent vapour diffusion.
The following instructions describe
the installation of the refrigerant
pipes of the indoor unit to the
outdoor component.
1.
Remove the pre-installed
plastic cover from the outdoor
component (figure 6).
2. Remove the white protective
caps from the quick-connectors
on the outdoor component,
as well as the flexible
refrigerant pipes on the indoor
unit (figures 7 and 8).
3. Before connecting the
refrigerant pipes, ensure that
the quick-release couplings are
situated in front of one another
(figure 9).
4. First connect and hand-tighten
the refrigerant pipes to ensure
they are correctly seated.
5. Then install the suction line
with the largest diameter
(figure 10).
6. Now fully tighten the fittings
using 2 suitably sized open-
ended spanners. Use one
spanner to counter the force
when tightening the fitting
(figure 11).
7. Open the stop cocks before
turning on the system using an
Allen key!
Additional notes for installation
The flexible refrigerant pipes
supplied can be extended by
3 metres or 8 metres.
The flexible extension lines are
pre-filled with refrigerant.
Only use tools and
components designed for
refrigeration applications.
NOTE
Only open the stop
cocks following complete
installation of the quick-
release couplings and
before turning on the system!
NOTE
10 Installation of suction line
6 Remove the plastic cover
9
Connect the quick-release couplings
7 Remove the protective caps
8 Remove the protective caps
Tighten
1st spanner
Counter with
2nd spanner
11 Tightening fittings
Tightening
torque:
14
15-20 Nm
38
33-40 Nm
12
50-60 Nm
58
65-75 Nm
34
95-105 Nm
Installation should only
be performed by certified
specialists.
NOTE
REMKO BL
20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO BL351 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO BL351 in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO BL351

REMKO BL351 User Manual - German - 28 pages

REMKO BL351 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info