587583
6
Zoom out
Zoom in
Previous page
1/32
Next page
Display on indoor unit
The display illuminates according to the settings.
max. 6 m
max. distance 6 m
Display on indoor unit
Timer
Automatic mode
Fan speed
Display
of coded error
messages, room and
target temperature
Cooling mode
Swing mode
Sleep function
Dehumidification mode
Temperature unit
Heating mode
Operation
Infrared remote control
The infrared remote control
sends the programmed settings
a distance of up to 6 m to the
receiver of the indoor unit.
Data will only be received correctly
if the remote control is pointed
at the receiver and no objects are
obstructing the transmission path.
First insert the supplied batteries
(2 each, type AAA) into the remote
control. To do so, remove the flap
from the battery compartment and
insert the batteries the correct way
around (see markings).
The indoor unit is easy to operate using an infrared remote control. This is supplied as standard. The indoor unit
beeps to acknowledge the correct transmission of data. If it is not possible to program the indoor unit using the
remote control, it can also be operated manually.
Problems are shown in code
(see Troubleshooting and
Customer service section).
! ATTENTION
Immediately replace flat
batteries with a new set,
otherwise there is a risk of
leakage.
It is recommended that the
batteries are removed if the
equipment is shut down for
long periods.
NOTE
Manual mode
The indoor units can be
commissioned
manually. After the air inlet screen
has been opened, the inner
recessed key can be pressed and
automatic mode can be activated.
In manual operation, the following
settings apply:
Cooling mode: last setting
Fan speed: AUTO
Heating mode: last setting
Fan: AUTO
Press a key on the infra-red
remote control to interrupt manual
operation.
Help save on energy consump-
tion in stand-by mode! If the
device, system or component
is not in use, we recommend
disconnecting the power sup-
ply. Components with a safety
function is excluded from our
recommendation!
TIP
REMKO BL
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO BL351 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO BL351 in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO BL351

REMKO BL351 User Manual - German - 28 pages

REMKO BL351 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info