587581
7
Zoom out
Zoom in
Previous page
1/28
Next page
"TIMER" Button
Press this button to activate the
automatic switch-on/off time
for the equipment. Buttons
and are used to program
these times at 10 minute
intervals.
"" Button
This button increases the value
when setting the clock or timer.
"" Button
This button decreases the value
when setting the clock or timer.
"SET" Button
Press this button to activate the
previously set timer.
"OFF " Button
Press this button to activate a
switch-off timer of 1/2, 1, 2 or
5 hours.
"TURBO" Button
Press this button to activate
maximum fan speed for 30
minutes.
"CLOCK" Button
Press this button to activate
clock setting mode.
"DISP" Button
Press this button to send the
current temperature of the
remote control to the indoor
unit using the I-Feel function.
"ION" Button
Press this button to switch on
the ion generator.
1. Automatic mode
In this mode the equipment is
running in cooling mode.
2. Cooling mode
In this mode the room air is
cooled to the preset target
temperature.
3. Heating mode
Heating mode is not supported.
4
. Circulation mode
In this mode the room air is
circulated.
5
. Dehumidifying mode
In this mode the room is
mainly dehumidified, the set
temperature is maintained.
"FAN" Button
Press this button to set the
required fan speed. 4 levels
are available: Automatic, high,
medium and low fan speed.
"I FEEL" Button
Press this button to change
the point of room temperature
measurement to the remote
control.
The temperature measured
by the remote control is then
sent at regular intervals to the
indoor unit.
" " (SLEEP) Button
Press this button to activate
sleep mode. In cooling mode,
the target temperature is
automatically raised by 1
°C after 1 hour. After the
2nd hour, the temperature
automatically increases/
reduces by 2°C. This function
deactivates itself after 6 hours.
" " (SWING) Button
This button activates the
oscillating fin function
to provide improved air
distribution in the room.
Buttons on the remote control
Buttons on the remote control
"ON/OFF" Button
Press this button to start the
equipment.
"" Button
Press this button to reduce the
desired temperature to a value
as low as 16 °C.
"" Button
Press this button to increase the
desired temperature to a value
as high as 30 °C.
"MODE" Button
Press this button to select the
operating mode. The indoor unit
has 5 modes:
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ATY351 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ATY351 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ATY351

REMKO ATY351 Additional guide - German - 1 pages

REMKO ATY351 User Manual - German - 28 pages

REMKO ATY351 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info