Manual REMKO ATY261 DC (page 4 of 36) (English)

587578

Zoom out

Zoom in

1/36

Safety notes

Disposal of packaging

All products are packed for

transport in environmentally

friendly materials. Make a valuable

contribution to reducing waste

and sustaining raw materials. Only

dispose of packaging at approved

collection points.

Disposal of equipment

and components

Only recyclable materials are used

in the manufacture of the devices

and components,

Help protect the environment

by ensuring that the devices

or components (for example

batteries) are not disposed

in household waste, but

only in accordance with

local regulations and in

an environmentally safe manner,

e.g. using certiﬁed ﬁrms and

recycling specialists or at collection

points.

Environmental

protection and

recycling

Carefully read this manual before

putting commissioning the

equipment. It provides useful

tips and information as well

as hazard warnings to prevent

injury or material damage .

Failure to follow the directions

in this manual can result in

endangerment to persons, the

environment and the equipment

itself and will void any claims for

liability.

■

Keep this manual and the

refrigerant datasheet near the

unit.

■ The unit may only be set up and

installed by qualified personnel.

■ The setup, connection and

operation of the unit and

its components must be in

accordance with the operating

conditions stipulated in this

manual and comply with all

applicable local regulations.

■ Mobile units must be set up

securely on suitable surfaces

and in an upright position.

Stationary units must be

permanently installed for

operation.

■ Modification of equipment

and components supplied by

REMKO is not permitted and

can cause malfunctions.

■ Equipment and components

may not be operated in areas

where there is an increased

risk of damage. Observe the

minimum clearances.

■ The electrical voltage supply

is to be adapted to the

requirements of the equipment.

■ The operational safety

of equipment and components

is only assured if they are used

as intended and fully assembled.

Safety devices may not be

modified or bypassed.

■ Do not operate equipment

or components with obvious

defects or signs of damage.

■ All housing parts and openings,

e.g. air inlets and outlets, must

be free of foreign objects, fluids

or gases.

■ The equipment and components

must be kept an adequate

distance from flammable,

explosive, combustible,

aggressive and dirty areas

or atmospheres.

■ Touching equipment parts can

result in burns or injury.

■ Installation, repair and

maintenance work may only

be carried out by authorised

specialists. Visual inspections

and cleaning can be performed

by the operator as long as the

equipment is not under voltage.

■ Take appropriate hazard

prevention measures when

performing installation, repair

or maintenance work or

cleaning the equipment.

■ The equipment or components

are not to be exposed to any

mechanical stresses, extreme

levels of humidity or direct

sunlight.

Warranty

In order to make warranty claims,

it s essential that the ordering

party or their representative

complete and return the "certificate

of warranty" and "commissioning

report" to REMKO GmbH &

Co. KG at the time when the

equipment was purchased and

commissioned. The warranty

conditions are detailed in the

"General terms and conditions".

Only the contractual parties can

strike special agreements beyond

these conditions. In this case, first

contact the contractual partner.

REMKO ATY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ATY261 DC in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ATY261 DC

REMKO ATY261 DC User Manual - German - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

REMKO ATY261 DC Manual

Product: