726579
50
Zoom out
Zoom in
Previous page
1/68
Next page
Error code: P0
Reason: If the power supply to the compressor controller is faulty, the display shows the error code
“P0” and the unit switches of
f
Cause:
n Electrical connection faulty
n Faulty control board
n Condenser fan motor defective or blocked
n Compressor defective
Check the connecting cables between the con-
trol board and compressor? Are they faulty?
YES
Establish a correct connection between the
control board and compressor
.
NO
Check the inverter controller (see section
Ä
‘Check the inverter controller’ on page 50).
Fault eliminated?
NO
Replace the control board.
YES
Check the condenser fan motor. Is it working
correctly?
NO
See troubleshooting fault F5
YES
Check the winding resistances of the com-
pressor
. Are they OK?
NO
Replace the compressor.
YES
Exchange the control boards of the outdoor
unit.
Check the inverter controller
Switch off the power supply to the unit. Wait until the capacitors are fully discharged and disconnect the com-
pressor from the control board.
Check the resistances at the outputs of the control board with the aid of a digital voltmeter as follows:
Voltmeter Normal resistance
(+) Red (-) Black
U
N
¥
(multiple MW)
V
W
(+) Red
REMKO ATY series
50
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ATY 266 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ATY 266 DC in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ATY 266 DC

REMKO ATY 266 DC User Manual - German - 64 pages

REMKO ATY 266 DC User Manual - Dutch - 64 pages

REMKO ATY 266 DC User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info