714792

Remington TouchTech Beard Trimmer MB4700 Manual

6
Zoom out
Zoom in
Previous page
1/148
Next page
6
FITTING/REMOVING THE ADJUSTABLE BEARD COMB
1. Switch your trimmer o.
2. Slide the comb up and out of the guides.
3. To ret the comb, slide the comb into the guides and press it all the way down until it
clicks.
ADJUSTING THE CUTTING LENGTH OF YOUR TRIMMER
Your trimmer can be adjusted manually in 0.1 mm increments. It can also store and recall the
last four trimming lengths used (Proles).
ADJUSTING MANUALLY
1. Use the up and down buttons NOto manually adjust the cutting length. Tap the
appropriate button to move the comb up or down in 0.1 mm increments.
2. Hold your nger on the button to move the comb quickly.
3. The display will show the selected length setting.
Note that the length settings cannot be changed when the trimmer is running.
USING PROFILES
When you adjust the comb length and then operate your trimmer the length setting will
automatically be stored in prole one. Your trimmer will store the four most recently used
settings in the order of the most recently used. This allows you to recall the settings you use
most often.
If all four prole locations have a setting stored and then you make a new cutting length
adjustment (one that has not been previously stored) the oldest prole will be deleted and
the new setting will be stored.
To recall a prole:
1. Ensure that the trimmer is stopped. Tap the proles button Q.
2. Tap the up and down buttons NOto select a prole. The display will show the cutting
length, and 1, 2, 3 or 4 horizontal bars to represent prole 1, prole 2, etc.
3. Tap the prole button Qagain to select that prole.
4. The comb will then move to the position stored in the selected prole.
To exit prole mode:
To exit without selecting a prole, either press the on/o button, or don’t press any button
for 5 seconds. Prole mode will be exited without any changes being made to the comb
length setting.
ENGLISH
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington TouchTech Beard Trimmer MB4700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington TouchTech Beard Trimmer MB4700 in the language / languages: English, All languages as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info