Manual Remington ProPower Hair Clipper HC7170 (page 8 of 168) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish)

714625

Zoom out

Zoom in

1/168

• To reattach once the blades are cleaned and dry, align the bottom of the blade with the

bottom blade housing tab and slide the cartridge back into place until you hear a click.

• Do not run the entire unit under the tap, only the blade set is meant to be submerged in

water.

• Place a few drops of cutter or sewing machine oil onto the blades. Wipe o excess oil.

EVERY SIX MONTHS

• Remove the 2 screws retaining the xed blade with a screwdriver.

• Remove the blade set.

• Brush out hairs from between the blades with a soft cleaning brush. Do not remove the

lubricating grease from the blades. It is not necessary to remove the small moving blade

from the unit.

• If the moving blade has been removed this can be re-tted by slotting the moving

blade holder over the pin in the centre of the interior product head.

• The groove on the moving blade just below the teeth should rest on the plastic pressure

arm which rides inside the groove. The xed blade should be assembled with the

bevelled edge of the 2 screw holes facing outward and xed with screws.

• Note that if the blades are not correctly aligned then cutting eciency will be impaired.

CLEANING CAUTIONS

• Do not use harsh or corrosive cleaners on the units or their blades.

• Ensure the appliance is switched o and unplug from the main outlet before cleaning.

REMOVING THE RECHARGEABLE BATTERY

We strongly recommend that a professional removes the rechargeable battery. Parts of the

shaver case, and tools have sharp edges and may cause injury if not handled correctly.

• The rechargeable battery must be removed from the appliance before it is scrapped.

• Disconnect the charging adapter before removing the battery.

1. Ensure that the battery is fully discharged. To do this, operate the trimmer until it stops.

2. Remove the comb attachment.

3. Detach the blade cartridge.

4. Pry the decorative panel o the top housing to expose the 6 screws located in the inner

housing.

5. Unscrew the 6 screws.

6. Pry the inner housing apart from bottom housing to expose the internals and printed

circuit board.

7. Remove the battery and printed circuit board assembly from the battery chamber.

8. Disconnect the battery from the circuit board.

• The battery must be disposed of at an appropriate ocial recycling/collection point.

• Do not attempt to operate the trimmer once you have opened it.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington ProPower Hair Clipper HC7170 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 2,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington ProPower Hair Clipper HC7170 Manual

Product: