Manual Remington MB4200 (page 5 of 104) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages)

719916

Zoom out

Zoom in

1/104

ENGLISH

• To deactivate turbo and go to the normal speed setting, press the On/O switch down

for 2 seconds.

• Always comb your beard or moustache with a ne comb before you start trimming.

ADJUSTABLE COMB

• Attach the adjustable comb by placing the comb above the groomer so that the back of

the adjustable comb sits above the detail blade. Slide the comb down onto the groomer

body so that the comb rails slot into the recesses found either side of the groomer body

until it clicks into place.

• To remove the comb make sure the comb is set at the minimum length setting. Grasp

the comb and pull rmly upwards and away from groomer, whilst pushing upwards with

your other thumb.

• Select the comb length by pressing the comb length adjustment button and pushing

upwards to increase the length setting or downwards to decrease the length on the

adjustable comb. The length setting can be seen on the length position indicator on the

back of the comb.

TO THIN AND TAPER THE BEARD/MOUSTACHE

• If you are trimming for the rst time start with the maximum trimming length setting.

• Turn the unit on.

• Place the at top of the adjustable comb against the skin.

• Slowly slide the trimmer through the hair. Repeat from dierent directions as necessary.

• If hair builds up in the trimmer comb during the trimming process, switch the unit o,

pull o the comb and brush the hair o.

CLOSER TRIMMING AND DETAIL BLADE TRIMMING

• For stubble lengths, remove the adjustable comb and follow the

instructions noted above.

• Using the main blade without the adjustable comb will trim hair to 1mm. Holding the

main blade perpendicular to the skin will trim hair to 0.4mm.

• To achieve a shaven look ensure the hair is already trimmed down to 1mm. Then using

the detail blade slowly rest the blades against the skin to trim down to 0.2mm.

• Note: The detail blade sits directly behind the front of the product. This has been

designed to pull the skin taught in order to eectively trim hairs down to the 0.2mm

length.

TRIMMING EDGE OF SIDEBURNS

• Hold the trimmer with the main blade facing you with the adjustable comb removed.

• Start with edge of sideburn and with the trimmer blades resting lightly against your

skin, use motions towards edge of sideburn line to trim the desired locations in facial

area.

• Shape as desired.

Min remington verkar inte ladda det blinkar 1 blå 1 röd 1 blå skall man ha knappen( på baksidan) i ner läge mot batteri ikonen eller upp mot lås ikonen Submitted on 27-8-2023 at 16:03
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington MB4200 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington MB4200 Manual

Product: