720030
9
Zoom out
Zoom in
Previous page
1/196
Next page
9
YOU ARE NOW READY TO USE YOUR DEVICE
1. Before treating an area, the skin should be shaved, clean, dry and free of any powders,
antiperspirants or deodorants. Do not wax, pluck or tweeze the hair out.
2. Press the control button. The device will turn on, the level 1 energy indicator light will
be on, and a fan sound will start.
3. Approximately 1 second after pressing the control button, the ready light will turn on.
The device is then ready to use at the lowest energy level.
4. Set the energy level by pressing the control button repeatedly to increase the energy
level until you have the level you want. The energy level indicator lights indicate the
chosen setting (refer to section ENERGY LEVELS).
5. Decide if you wish to treat the area by Gliding or Pulsing (refer to section PULSING AND
GLIDING).
6. Apply the treatment window to the skin. Make sure that the skin is spread evenly and
smoothly. When the treatment window is in full contact with the skin, the ready light
will start blinking slowly.
7. The device will rst determine the colour of your skin automatically and it will ash a
pulse of light onto your skin. You will feel a mild sensation of warmth and tingling, and
you may hear a popping sound.
If you are pulsing, remove the device from your skin. The device will immediately
recharge for the next pulse. After a few seconds (depending on the energy level)
the ready light will turn on again, and start blinking slowly when pressed against
the skin.
If you are pulsing, repeat the process. If you are gliding, simply continue. Continue to
pulse or glide until you have treated the area fully.
Stop use immediately, if your skin blisters or burns.
AFTER TREATMENT
When you have nished your treatment session:
1. Turn the device o by giving the control button an extended press. Remember the last
energy level setting you used, because it will not be restored when you turn the device
on again.
2. Remove the adapter from the electrical outlet.
CLEANING AND MAINTENANCE
It is important to clean your device after each treatment.
1. Unplug the device.
2. To clean the device including the treatment window, wipe with a clean, dry cloth. Never
use acetone or other abrasive uids, because they will damage your device.
3. After cleaning, we recommend you store the device in its original box.
Never immerse your device or any of its parts in water.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington IPL3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL3500 in the language / languages: All languages as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info