616920
11
Zoom out
Zoom in
Previous page
1/152
Next page
11
• Afterreachinglevel3,pressingtheEnergyLevelButtonagainwillresetbacktoenergylevel1.
• Thei-LightREVEALisequippedwith3energylevels.Level1(1bar)isthelowestandlevel3(3bars)
is the highest.
, TIP: For the most eective results, always use the highest energy level that does not cause discomfort
on the skin.
, Test the i-Light REVEAL on your skin
Before your rst full treatment, test the i-Light REVEAL device on a small patch of skin and wait 24
hours to ensure there are no adverse reactions.
• Startatenergylevel1andashonce.
Flash the skin by placing the ash window rmly against your skin. You will hear a ‘beep beep’ and the
skin tone sensor should show a solid green light. Press the ash button to deliver a ash. Fig. 12
, TIP: It is helpful to use a mirror to see the skin tone sensor. If the reected light is unpleasant, you may
wish to close your eyes before each ash.
• Mildtomoderatediscomfortisnormal.IfaashdeliveredatEnergyLevel1feelstolerable,increaseto
Energy Level 2. Move the device to a dierent spot and ash the i-Light REVEAL one more time.
Repeat this process until you nd the setting that feels right for you.
• Wait24hoursandthenlookatthetestarea.Iftheskinappearsnormal,proceedwithyourrstfull
treatment at that the energy level you determined is right for you.
, NOTE: You must test the device on each area of the face or body you wish to treat.
, Treat desired area(s) with the i-Light device
, Prepare your skin for treatment
1.Ensuretheareatobetreatediscleanandfreefromoils,deodorants,perfume,makeup,lotionsand
creams. Shave or trim the hair from the area to be treated, and ensure the skin is clean and dry. If
trimming; the hair must be trimmed to less than 0.5mm. Fig. 13
Fig. 12
Fig. 13
ENGLISH
GB
D
I
NL
F
EPSK
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington IPL 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington IPL 2000 in the language / languages: All languages as an attachment in your email.

The manual is 4,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info