Manual Remington HF9050 (page 5 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages)

719947

Zoom out

Zoom in

1/120

ENGLISH

TIPS FOR BEST RESULTS

• Always hold the shaver at right angles to the skin so that all foils are touching the skin

with equal pressure.

• Use moderate to slow stroking movements. The use of short linear motions in

stubborn areas may obtain a closer shave, especially along the neck and chin line.

• DO NOT press hard against the skin in order to avoid damage to the foil heads.

CARE FOR YOUR SHAVER

Care for your appliance to ensure a long lasting performance. We recommend you clean

your ppliance after each use.

The easiest and most hygienic way to clean the appliance is by rinsing the appliance head

after use with warm water.

1. Remove the foil assembly by pressing the release button on the side of the head and

lifting the foil assembly upwards to remove it from the hair pocket (Fig A).

2. Tap out the excess hair shavings and rinse the foils under running water (Fig B).

3. Do not clean the shaving foil with a brush.

4. Replace the head assembly by placing the assembly on top of the hair pocket, press

down and click into place.

• Lubricate the teeth of the trimmer every six months with a drop of sewing machine oil.

REPLACING THE FOILS AND CUTTERS

To ensure continued high quality performance from your shaver, we recommend the foils

and cutters are replaced every six months.

SIGNS THAT YOUR FOILS AND CUTTERS NEED REPLACING.

• Irritation: as foils get worn, you may experience skin irritation.

• Pulling: as the cutters wear, your shave may not feel as close and you may feel the

cutter pulling your hair.

• Wear through: you may notice that the cutters have worn through the foils.

TO REPLACE THE FOIL:

1. Remove the foil assembly by pressing the release button on the side of the head and

lifting the foil assembly upwards to remove it from the hair pocket (Fig A).

2. Insert the new foil assembly on the hair pocket, press down and click into place.

REPLACING THE CUTTERS

1. Grasp the cutter between your thumb and forenger and pull upwards.

2. Snap the new cutter into the oscillator tip.Note: DO NOT press on the cutter ends as

this may cause damage.

3. Foil head replacements can be found on the Remington website.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington HF9050 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington HF9050 Manual

Product: