Manual Remington HC9105 (page 6 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages)

719579

Zoom out

Zoom in

1/132

CARE FOR YOUR HAIRCLIPPER

AFTER EACH USE

• Ensure the appliance is switched o and unplugged from the mains before cleaning.

• Brush the accumulated hair from the blades. The blades and product unit can be rinsed

under the tap. Please see cleaning section below on this.

• It is recommended that the blades should be removed, and any accumulated hair be

brushed out after each use. 1 or 2 drops of clipper oil should be added to tip of blades,

and a drop on the back gliding surfaces.

REMOVING AND FITTING THE BLADE SET

• The blades can be released by placing your nger or thumb into the push release point

and sliding the blade o the product unit.

• To reattach place the blade set on top of the product unit and slide this gently into place

until you hear and feel it click into place.

CLEANING CAUTIONS

• This clipper is fully washable. The clipper and blade set can be rinsed under the tap for

cleaning. Only rinse the blades when needed.

• For a deep clean, let the blades run while rinsing under the tap.

• Please ensure the product is fully dried after, especially the blade set surfaces.

• Caution: do not wash when plugged into the mains power.

• Once the blade set is fully dried, to enhance performance and prolong the life of your

clipper, we strongly recommend for you to oil the blades. To be properly oiled, the

blade set needs to be removed, so drops of oil can be added to the back gliding surface.

EVERY SIX MONTHS

• At regular intervals the blade set should be removed and cleaned.

• Remove the 2 screws retaining the xed blade with a hex screwdriver. Do not remove

blade set.

• Brush out hairs from between the blades with soft cleaning brush. Do not remove the

lubricating grease on the plastic components. It is not necessary to remove the small

moving blade from the unit.

• If the blades are not correctly aligned, cutting eciency will be impaired.

• Place a few drops of oil onto the blade’s gliding surface. Wipe o excess oil.

CLEANING CAUTIONS

• Ensure the appliance is switched o and unplug from the main outlet before cleaning

• Only the attachment guide combs and blade set may be removed from the product for

cleaning.

• Do not use harsh or corrosive cleaners on the units or their blades.

• Suitable for cleaning under an open water tap

ENGLISH

Led stays on. No matter how long I have it on charge. Submitted on 7-12-2021 at 06:10
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington HC9105 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington HC9105 Manual

Product: