Manual Remington HC9100 (page 5 of 132) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages)

719580

Zoom out

Zoom in

1/132

TO ATTACH A COMB

• Hook front side of attachment comb on front side of teeth.

• Press back side of comb downwards, until the tab clicks into place.

TO REMOVE THE COMB

• Press upward on the tab to release the comb.

• With tab released, pull comb away from clipper and unhook front of the blade.

INSTRUCTIONS FOR CUTTING HAIR

• For even cutting, allow the comb attachment/blade to cut its way through the hair. Do

not force it through quickly. If you are cutting for the rst time, start with the maximum

comb attachment.

STEP 1 – Nape of the neck

• Attach the 3mm or 6mm xed comb

• Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of

the head at the base of the neck.

• Slowly lift the clipper, working upwards and outwards through the hair, trimming just a

little at a time.

STEP 2 – Back of the head

• With the 12mm or 16mm guide comb attached, cut the hair at the back of the head.

STEP 3 – Side of the head

• With the 3mm or 6mm guide comb attached, trim sideburns. Then change to the longer

9mm guide comb and continue to cut the top of the head.

STEP 4 – Top of the head

• Use the longer length xed combs of 22mm or 25mm to cut hair on top of the head

against the direction in which the hair normally grows.

• Always work from the back of the head.

STEP 5 – The nishing touches

• Use the clipper without an attachment comb for close trimming around the base and

sides of the neck.

• To produce a clean straight line at the sideburns, reverse the hair clipper. Place the

reversed clipper at right angles to the head, tips of the blades lightly touching the skin

and then work downwards.

SHORT TAPERED STYLES – “FLAT TOPS” & SHORT CUTS

• Starting with the longest xed comb (25mm), cut from the back of the neck to the

crown. Hold the guide comb at against the head and slowly move the clipper through

the hair.

• Use the same procedure from the lower side to the upper side of the head. Then cut the

hair against the direction in which it grows and level with the sides.

• To give a “at top” look, the hair on top of the head must be cut over the top of a at comb.

• Use a closer guide comb to taper the hair down to the neckline as desired.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington HC9100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington HC9100 Manual

Product: