Manual Remington HC7110 (page 6 of 128) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages)

719582

Zoom out

Zoom in

1/128

STEP 3 – Side of the head

• With the comb set at 3mm or 6mm, trim sideburns. Then change to the longer 9mm

guide comb and continue to cut the top of the head.

STEP 4 – Top of the head

• Use the longer length comb attachment and set it to 24mm or 27mm then cut hair on

top of the head against the direction in which the hair normally grows.

• For longer hair on top, use the longer length comb attachment (24 – 44mm) to achieve

the desired style.

• Always work from the back of the head.

STEP 5 – The nishing touches

• Use the clipper without an attachment comb for close trimming around the base and

sides of the neck.

• To produce a clean straight line at the sideburns, reverse the hair clipper.

• Place the reversed clipper at right angles to the head, tips of the blades lightly touching

the skin and then work downwards.

CARE FOR YOUR HAIRCLIPPER

• Your clipper is tted with high quality blades.

• To ensure long lasting performance of your clipper, clean the blades and unit regularly.

• Always keep the attachment guide comb on the trimmer blade.

AFTER EACH USE

• Ensure the appliance is switched o and unplugged from the mains before cleaning.

• • Brush the accumulated hair from the blades and body of the clipper. Do not submerge

the clipper in water.

• To clean unit, wipe with a damp cloth and dry immediately.

• Place a few drops of cutter or sewing machine oil onto the blades. Wipe o excess oil.

EVERY SIX MONTHS

• Remove the 2 screws retaining the xed blade with a screwdriver.

• Remove the blade set.

• Brush out hairs from between the blades with a soft cleaning brush. Do not remove the

lubricating grease from the blades. It is not necessary to remove the small moving blade

from the unit.

• If the moving blade has been removed this can be re-tted by slotting the moving

blade holder over the pin in the centre of the interior product head.

• The groove on the moving blade just below the teeth should rest on the plastic pressure

arm which rides inside the groove. The xed blade should be assembled with the

bevelled edge of the 2 screw holes facing outward and xed with screws.

• Note that if the blades are not correctly aligned then cutting eciency will be impaired.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington HC7110 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington HC7110 Manual

Product: