510221

Remington HC5950 Manual

5
Zoom out
Zoom in
Previous page
1/158
Next page
5
ENGLISH
adjust to the desired cutting length following the steps below.
•Withthelonglengthcombinstalledontotheproductandthecorrespondingcomb
switchselected(A)theadjustmentcanbegin.Thelengthcannowbeincreasedor
decreased in 0.5mm increments. Also ensure that the locked button is in the unlocked
position.
•Fortheshortlengthcombthereare2combswitchsettings,Bwillincreaseanddecrease
the cutting length in 0.5mm increments and setting C will adjust the length in 0.1mm
increments.
Note: Ifaredwarninglightisvisiblethroughthecombwheninstalled,thisisindication
that the comb selection switch is on the wrong setting.
• Pressandholdthearrowuptoincreasethecuttinglengthanddowntodecreaseit.The
comb will move to reach each setting, the lengths will change as you hold the up/down
arrow, and the setting number will appear on the digital display.
• Selectthedesiredboostlevelbypressingtheboostbuttonwiththelockinthe
unlocked position. The display will indicate the level.
• Oncethedesiredlengthandboostlevelarereached,lockthesystemusingthelock
switch. The display should show a closed lock, and the current length setting and boost
level. Proceed to use the clipper
• Note: Adjustments to length and boost can be done anytime the lock switch is set to
unlock. Setting can be done with the main motor o, if the power button is pressed a
second time. To turn the main motor back on the power button needs to be pressed
again.
• Pressandholdthebatteryicontodisplaytheremainingbatterytimeinminutesonthe
digital display. This can be used whilst the appliance is locked.
, SWITCHING BETWEEN UNITS OF LENGTH (mm, #)
Holdthepowerbuttonfor3seconds,thedisplaywillshowthechangebetweenmmand#,at
this time release the power button. The setting has been changed.
Note:Iftheusercontinuestoholdthepowerbuttonfor8seconds,thesystemwillenterreset
mode
A CAUTION
Once the digital display changes from mm to grade number, release the power button to avoid
an inadvertent restart.
NOTE: The comb must be attached to the appliance in order to use the hair length selector. To
achieve 0.4mm the comb must be removed.
, Touch Lock
•Onceyourdesiredlengthandmotorspeedisset,lockthedevicebyslidingtheswitch
into the lock position.
•Theappliancewillnotcutifthelockswitchisintheunlockposition.
, Before Starting The Cut
• Inspecttheclippermakingsurethatitisfreefromhairanddirt.
• Seatthepersonsothattheirheadisapproximatelyatyoureyelevel.
• Beforecutting,alwayscombthehairsoitistanglefreeanddry.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington HC5950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington HC5950 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info