616901

Remington HC5400 Manual

8
Zoom out
Zoom in
Previous page
1/168
Next page
8
• Pushthebuttonthatislocatedonthefrontofthehairclipper.Thebladeswill
slide out and the blade set can be easily cleaned under the tap.
• Oncethebladesarecleanedthebladesarelockedintoplacebypushingthe
blade set towards the hair clipper head and will snap into place.
• Donotruntheentireunitunderthetap,onlythebladesetismeanttobe
submerged in water.
Note: Ensure the clipper is turned o when cleaning.
, EVERY SIX MONTHS
• Atregularintervalsthebladesetshouldberemovedandcleaned.
• Removethe2screwsretainingthexedbladewithascrewdriver.Donot
remove blade set.
• Brushouthairsfrombetweenthebladeswithsoftcleaningbrush.Donot
remove the lubricating grease from the blades. It is not necessary to remove the
small moving blade from the unit.
• Ifthemovingbladehasbeenremovedthiscanbere-ttedbyslottingthe
coated blade holder over the pin in the centre of the interior product head. The
groove on the coated blade, just below the teeth, rests on a metal plate at the
 oppositesidetothescrewholes.Thexedbladeisttedwiththeraisedprole
 pointingoutwardsandxedwiththe2screws.
• Notethatifthebladesarenotcorrectlyalignedthencuttingeciencywillbe
impaired.
• Placeafewdropsofcutterorsewingmachineoilontotheblades.Wipeo
excess oil.
, CLEANING CAUTIONS
• Ensuretheapplianceisswitchedoandunplugfromthemainoutletbefore
cleaning.
• Onlytheattachmentguidecombsandtrimmerblademayberemovedfrom
the product for cleaning.
• Cleaningshouldbedonewithasoftbrush,suchasthebrushsuppliedwiththe
product.
• Donotrinseunderwater.
• Donotuseharshorcorrosivecleanersontheunitsortheirblades.
ENGLISH
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington HC5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington HC5400 in the language / languages: All languages as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info