Manual Remington HC5100 (page 4 of 80) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages)

719586

Zoom out

Zoom in

1/80

TO REMOVE THE COMB

1. Hold the clipper with the blades facing away from you.

2. Depress comb lock and rmly push the comb upward and away from the blades.

AJUSTING THE COMB

Depress the comb lock then slide the comb up or down until the chosen marking on the

setting scale is opposite the arrow on the body of the trimmer.

BEFORE STARTING THE CUT

• Inspect the clipper making sure that it is free from hair and dirt.

• Seat the person so that their head is approximately at your eye level.

• Before cutting, always comb the hair so it is tangle free and dry.

• For even cutting, allow the comb attachment/blade to cut its way through the hair. Do

not force it through quickly.

STEP 1 – NAPE OF THE NECK

1. Set the comb to 3mm or 6mm.

2. Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of

the head at the base of the neck.

3. Slowly lift the clipper, working upwards and outwards through the hair, trimming just a

little at a time.

STEP 2 – BACK OF THE HEAD

With the comb set at 12mm or 18mm, cut the hair at the back of the head.

STEP 3 – SIDE OF THE HEAD

Set the comb to 3mm or 6mm, trim sideburns then change the setting to 9mm and continue

to cut the top of the head.

STEP 4 – TOP OF THE HEAD

• For longer hair on top, use without a guide comb. Lift the hair on top of the head with a

small hand comb. Cut over the hand comb with the hair lifted or hold the hair between

the ngers to lift it and cut it to the desired length.

• Always work from the back of the head.

STEP 5 – THE FINISHING TOUCHES

• Use the clipper without an attachment comb for close trimming around the base and

sides of the neck.

• To produce a clean straight line at the sideburns, reverse the hair clipper. Place the

reversed clipper at right angles to the head, tips of the blades lightly touching the skin

and then work downwards.

SHORT TAPERED STYLES – “FLAT TOPS” AND SHORT CUTS

• Hold the guide comb at against the head and slowly move the clipper through the hair.

• Use the same procedure from the lower side to the upper side of the head. Then cut the

hair against the direction in which it grows and level with the sides.

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remington HC5100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish, All languages as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remington HC5100 Manual

Product: