616897
7
Zoom out
Zoom in
Previous page
1/144
Next page
7
C CARE FOR YOUR HAIRCLIPPER
To ensure long lasting performance of your clipper, clean the blades and
unit regularly.
Always keep the clipper in the provided travel pouch.
Ensure the appliance is switched o and unplugged from the mains before
cleaning.
Do not use harsh or corrosive cleaners on the unit or blades.
Cleaning should be done with a soft brush.
After each use - brush the accumulated hair from the blades.
, WASHABLE CLEANING
The QuickCut Clipper is fully washable for easy cleaning.
Ensure the appliance is switched o and unplugged from the mains.
, WASHOUT PORT INSTRUCTIONS
, Note: Never rinse, wash or otherwise subject this product to liquid whilst the
power cord is connected.
For best results, keep trimmer running while running it under the tap. Allow
water to run through the washout port and over the blades. Recommended
to rinse after each use.
Ensure the clipper is dry after cleaning.
For more thorough cleaning the blade set can be easily removed to wash
any hair trimmings from the blades. To release the blade set, push the blade
set release button found on the base of the clipper.
Ensure the blades are dry after rinsing under the tap. To reattach, align the
blade set onto the clipper and push the blade set towards the clipper body
until it clicks into place.
Place a small drop of cutter or sewing machine oil onto the blades at each
end and at the middle point of the blades. Turn the unit on for a few
seconds to distribute the oil then turn o and wipe o excess oil.
BATTERY REMOVAL
The battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing
the battery.
Ensure the clipper is discharged of all power.
ENGLISH
GBDNLFEIDKSFINPSKCZ
HUN
PLRUTRROGRSI
AE HR
UA
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington HC4250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington HC4250 in the language / languages: All languages as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info