429040
8
Zoom out
Zoom in
Previous page
1/11
Next page
080757_REM_IFU_EP3000_EP4000_22L.indd Sec2:5080757_REM_IFU_EP3000_EP4000_22L.indd Sec2:5 05.11.2008 14:18:45 Uhr05.11.2008 14:18:45 Uhr
ENGLISH
5
NOTE: The body of the epilator is not washable. Do not submerge in water.
Replace the curved epilation head, ensuring that the wire is at the higher side of the epilator.
Replace the epilation head assembly into the unit by gently pressing until it clicks into place.
CLEANING THE SHAVING HEAD
Ensure the epilator is turned off and disconnected from the mains.
Press the head release button and remove the shaving head.
Remove the blade and trimmer assembly by placing your fingers either side of the assembly
and pulling upwards.
Gently shake the blade and trimmer assembly to remove the hair. Brush the trimmers
and shaver housing.
Replace the blade and trimmer assembly.
NOTE: Never use the cleaning brush on the foil as damage may occur.
TO REMOVE RESIDUE
To remove residue from the stainless steel tweezers, dampen a swab with alcohol. Gently run the swab
over the tweezers until the residue has been removed.
CAUTION: Make sure that the cotton swab is not soaked in alcohol as this may damage the epilator.
Not suitable for cleaning under water.
CARE FOR YOUR EPILATOR
To ensure long lasting performance of your epilator, clean the head assembly regularly.
Always keep the protective cap on the epilation head when the epilator is not in use.
AFTER EACH USE
CLEANING THE EPILATION HEAD
Ensure the epilator is turned off and disconnected from the mains.
Press the head release button and open the head assembly. (Diagram G)
Turn the head assembly upside down.
Using your thumbs, push the small sides together and push the epilation head upwards. This releases the
curved epilation head.
Brush the accumulated hair from the tweezers by turning the barrel manually. Alternatively, remove the
epilation head from the epilator and rinse under running water. Allow to dry completely before attaching
to the epilator body. (Diagram F)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington ep 6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington ep 6020 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info