714796

Remington Beard Kit Trimmer MB4050 Manual

6
Zoom out
Zoom in
Previous page
1/172
Next page
6
• To attach a comb, rst ensure the adjustable zoom wheel is set to 1. Then slide on the
desired comb so that the comb rails align into the slots found at the top of the trimmer
head.
• Select the comb length by rotating the zoom wheel upwards to increase the length and
downwards to decrease the length. Please see the table below for the dierent length
increments.
Setting Short Comb XL Comb
1 1.5mm (Grade 0) 20mm
2 2.5mm (Grade 1) 21mm
3 4mm 22mm (Grade 7)
4 5.5mm (Grade 2) 23.5mm
5 7mm 25.5mm (Grade 8)
6 9mm (Grade 3) 27.5mm
7 11mm (Grade 4) 29.5mm
8 14mm (Grade 5) 32mm
9 18mm (Grade 6) 35mm
• To remove the comb, with the adjustable zoom wheel set to 1, pull the comb off the
beard trimmer.
• For a more detailed, precision stubble look, attached the adjustable stubble comb
which can trim hair between 1 to 5mm. The cutting lengths increase in 0.5 increments.
• Please note that the adjustable zoom wheel does not increase the length settings on
the stubble comb. To adjust these length settings, turn the dial found on the back of the
stubble comb which will then indicate the different trimming lengths to choose from.
• Note: The below instructions are recommended for those with or wanting to trim beard
hair between 1.5 to 18mm in length.
BEARD BIB
The beard bib is designed to collect hair during trimming in order to prevent mess and
making disposal of hair clippings easier.
1. The suction hooks are designed to x to a smooth non-porous surface such as a mirror
or ceramic bathroom tiles. Position them horizontally at about shoulder height. Rotate
the hook downwards to activate the suction hook (g. D).
2. Fasten the bib around the neck then hook the loops over the suction hooks (g. E)
3. When nished, leave the bib fastened around your neck then unhook the loops and
bring the two ends of the bib together. Keep the ends raised to contain the hair
clippings.
4. Lower the end of the bib over a waste bin and gently shake out the hair clippings using
the bib as a chute to guide the clippings into the bin.
ENGLISH
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remington Beard Kit Trimmer MB4050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remington Beard Kit Trimmer MB4050 in the language / languages: All languages as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info