689791
37
Zoom out
Zoom in
Previous page
1/88
Next page
1. Using adjusting screw A, adjust the factory setting to the setting for
propane. The rotations for each boiler type are described in the table.
Tab.30 Settings for propane
Boiler type Action
Quinta Ace 30 Rotate the adjusting screw A on the venturi 3½
turns in a clockwise direction
Quinta Ace 45 Rotate the adjusting screw A on the venturi 4¾
turns in a clockwise direction
Quinta Ace 55 Rotate the adjusting screw A on the venturi 6½
turns in a clockwise direction
Quinta Ace 65 Rotate the adjusting screw A on the venturi 6½
turns in a clockwise direction
Quinta Ace 115 Rotate the adjusting screw A in a clockwise direc
tion until it is closed, then:
Rotate the adjusting screw A on the gas valve unit
3½–4 turns in an anticlockwise direction
Adjusting fan speed parameters for different gas types
The factory fan speed settings can be adjusted for a different type of gas
at installer level.
> Parameters, counters, signals > Parameters
Use the rotary knob to navigate.
Use the button to confirm your selection.
1. Enable Installer access.
1.1. Select the tile [ ].
1.2. Enter code: 0012.
2. Select the tile [ ].
3. Select Parameters, counters, signals.
4. Select Parameters.
5. Select the required parameter.
6. Change the setting.
Fan speed for different gas types
1. Adjust the fan speed (if necessary) for the gas type used according to
the table below. The setting can be changed with a parameter setting.
If a boiler is not suitable for a certain gas type, it is indicated with "-" in
the table.
Tab.31 Adjustment for gas type G31 (propane)
Code Display text Description Adjustment range 30 45 55 65 90 115
DP003 Abs. max fan
DHW
Maximum fan speed on Do
mestic Hot Water
1400 - 7500 Rpm 3800 5100 4800 5400 6000 6700
GP007 Fan RPM
Max CH
Maximum fan speed during
Central Heating mode
1400 - 7500 Rpm 3800 5100 4800 5400 6000 6700
GP008 Fan RPM Min Minimum fan speed during
Central Heating + Domestic
Hot Water mode
1000 - 4000 Rpm 1550 1550 1500 1600 2000 1800
GP009 Fan RPM
Start
Fan speed at appliance start 1400 - 4000 Rpm 2500 3000 2500 2500 2500 3500
2. Check the setting of the gas/air ratio.
Fan speeds for BREEAM compliance
To comply with the BREEAM regulation, the fan speeds need to be
adjusted.
7 Commissioning
7684359 - v.11 - 13122021 37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta ACE 65 T-Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta ACE 65 T-Control in the language / languages: English as an attachment in your email.

The manual is 4.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Quinta ACE 65 T-Control

Remeha Quinta ACE 65 T-Control Usermanual and installation guide - German - 116 pages

Remeha Quinta ACE 65 T-Control Usermanual and installation guide - Dutch - 80 pages

Remeha Quinta ACE 65 T-Control Usermanual and installation guide - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info