805732
60
Zoom out
Zoom in
Previous page
1/104
Next page
Tab.73 Soll-/Einstellwerte für O2 bei Teillast für G30/G31 (Butan/
Propan)
Werte bei Teillast für G30/G31 (Butan/Propan) O2 (%)(1)
Quinta Ace 160 5.4 (1) - 5.7
(1) Nennwert
Vorsicht!
Die O2-Werte bei Teillast müssen höher sein als die O2-Werte bei
Volllast.
3. Wenn die gemessenen Werte nicht den in der Tabelle angegebenen
Werten entsprechen, muss das Gas-/Luftverhältnis korrigiert werden.
4. Mit der Einstellschraube B den Prozentsatz von O2 für die verwendete
Gasart auf den Nennwert stellen. Dieser Wert sollte sich immer
innerhalb der Grenzwerte für die maximale und minimale Einstellung
befinden.
7.3 Abschließende Arbeiten
1. Messausrüstung entfernen.
2. Die Kappe auf die Prüföffnung für Abgas schrauben.
3. Die Gasventileinheit abdichten.
4. Frontverkleidung wieder montieren.
5. Das Heizungssystem auf etwa 70 °C aufheizen.
6. Den Kessel abschalten.
7. Das Heizungssystem nach etwa 10 Minuten entlüften.
8. Den Kessel einschalten.
9. Den Wasserdruck überprüfen. Wenn nötig, Wasser für die
Heizungsanlage nachfüllen.
10. Die folgenden Angaben auf dem mitgelieferten Aufkleber eintragen
und den Aufkleber neben dem Typschild an der Anlage anbringen.
Gasart, falls auf eine andere Gasart umgestellt;
Gasanschlussdruck;
Der Abgastyp, falls auf Überdruckanwendung eingestellt;
Die geänderten Parameter für oben genannte Änderungen;
Alle für andere Zwecke modifizierten Gebläsedrehzahlparameter.
11. Optimieren Sie die Einstellungen entsprechend den Anforderungen
des Systems und der Präferenzen des Benutzers.
Verweis:
Weitere Informationen siehe Einstellungen, Seite 61 und
Gebrauchsanweisung, Seite 85.
12. Die Inbetriebnahmeeinstellungen auf dem Schaltfeld sichern, damit
sie nach einem Zurücksetzen wiederhergestellt werden können.
13. Den Benutzer in die Funktionsweise des Systems, Kessels und der
Steuerung einweisen.
14. Den Benutzer über die erforderlichen Wartungsarbeiten informieren.
15. Dem Benutzer alle Anleitungen aushändigen.
Abb.79 Position der Einstellschraube B
AD-0000140-02
2
1
B
Abb.80 Beispiel eines ausgefüllten
Aufklebers
AD-3001124-01
Adjusted for / Réglée pour /
Ingesteld op / Eingestellt auf
/ Regolato per / Ajustado
para / Ρυθμισμένο για /
Nastawiony na / настроен
для / Reglat pentru /
настроен за / ayarlanmıştır /
Nastavljen za / beállítva/
Nastaveno pro / Asetettu
kaasulle / Justert for/
indstillet til/ ضبط ل :
C(10)3(X)
Gas
C(12)3(X)
mbar
Parameters / Paramètres /
Parameter / Parametri /
Parámetros / Παράμετροι /
Parametry / Параметры /
Parametrii / Параметри /
Parametreler / Paraméterek
/ Parametrit / Parametere /
Parametre / المعلمات :
G20
20
DP003 - 3300
GP007 - 3300
GP008 - 2150
GP009 -
7 Inbetriebnahme
60 7698981 - v.04 - 30092021
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta Ace 160 HMI T-control SCB-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta Ace 160 HMI T-control SCB-10 in the language / languages: German as an attachment in your email.

The manual is 3.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info