805749
50
Zoom out
Zoom in
Previous page
1/76
Next page
Code Display text Description Solution
H.01.08 CH Temp Grad. Level3 Maximum CH temperature gradient
level3 exceeded
Maximum heat exchanger temperature increase
has been exceeded:
No flow or insufficient flow:
Check the circulation (direction, pump,
valves)
Check the water pressure
Check the cleanliness of the heat exchanger
Check that the central heating system has
been correctly vented to remove air
Sensor error:
Check that the sensors are operating correct
ly
Check that the sensor has been fitted proper
ly
H.01.09 Gas Pressure Switch Gas Pressure Switch Gas pressure too low:
No flow or insufficient flow:
Make sure that the gas valve is fully opened
Check the gas supply pressure
If a gas filter is present: Make sure that the
filter is clean
Wrong setting on the gas pressure switch:
Make sure that the switch has been fitted
properly
Replace the switch if necessary
H.01.13 Max THeat Ex Heat Exchanger temperature has
exceeded the maximum operating
value
Maximum heat exchanger temperature excee
ded:
Check the circulation (direction, pump, valves).
Check the water pressure.
Check that the sensors are operating correctly.
Check that the sensor has been fitted properly.
Check the cleanliness of the heat exchanger.
Check that the central heating system has
been correctly vented to remove air.
H.01.14 Max Tflow Flow temperature has exceeded the
maximum operating value
Flow temperature sensor above normal range:
Bad connection: check the wiring and connec
tors
No flow or insufficient flow:
Check the circulation (direction, pump,
valves)
Check the water pressure
Check the cleanliness of the heat exchanger
H.01.15 Max Tflue Gas Flue gas temperature has exceeded
the maximum operating value
Maximum flue gas temperature exceeded:
Check the flue gas outlet system
Check the heat exchanger to ensure that the
flue gas side is not clogged
Faulty sensor: replace the sensor
H.02.00 Reset In Progress Reset In Progress Reset procedure active:
No action
H.02.02 Wait Config Number Waiting For Configuration Number Configuration error or unknown configuration
number:
Reset CN1 and CN2
H.02.03 Conf Error Configuration Error Configuration error or unknown configuration
number:
Reset CN1 and CN2
H.02.05 CSU CU mismatch CSU does not match CU type Configuration error:
Reset CN1 and CN2
10 Troubleshooting
50 7701838 - v.09 - 10122021
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta Ace 160 - T Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta Ace 160 - T Control in the language / languages: English as an attachment in your email.

The manual is 3.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info