805749
27
Zoom out
Zoom in
Previous page
1/76
Next page
5.5.4 The CB-01 connection PCB
The CB-01 is placed in the control box. It provides easy access to all the
standard connectors.
Connecting the system pump
1. Connect a system pump to the Pump terminals of the connector.
Important
The maximum power consumption is 300 VA.
The function of the system pump can be changed using parameters
PP015, PP016 and PP018.
Connecting a PWM system pump
A PWM system pump can be connected to the boiler and can be
controlled in a modulating way from the boiler
1. Connect the PWM pump to the PWM terminals of the connector.
Important
Contact us for more information.
Connecting an outdoor temperature sensor
An outdoor temperature sensor can be connected to the Tout connector.
1. Connect the two-wire cable to the Tout connector.
Use below mentioned sensors, or sensors with identical characteristics.
Set parameter AP056 to the installed outdoor temperature sensor type.
AF60 = NTC 470 Ω/25°C
QAC34 = NTC 1000 Ω/25°C
When an on/off thermostat is also connected, the boiler will control the
temperature with the set point from the internal heating curve. OpenTherm
controllers can also use the outdoor temperature sensor. In that case, the
desired heating curve must be set on the controller.
Frost protection combined with outdoor sensor
The central heating system can also be protected against frost in
combination with an outdoor sensor. The radiator valve in the frost-
sensitive room must be open.
1. Connect the outdoor sensor to the terminals Tout of the connector.
The frost protection works as follows with an outdoor sensor:
At outside temperatures below -10 °C: the circulation pump switches on.
At outside temperatures above -10 °C: the circulation pump continues to
run and then switches off.
Fig.24 Connection PCB CB-01
AD-3000672-03
IN
X4
X5 X6
X9 X10
X3
X2
OUT
S-Bus
+0
0-10
+0
PWM
OT
On/off
N
Pump
L
N
Pump
L
RLBL
Tout
Fig.25 System pump
AD-3001306-01
N L
Fig.26 PWM system pump
AD-3001307-01
+
-
PWM
Fig.27 Tout connector
AD-4000006-03
Tout
Fig.28 Outdoor sensor
AD-3000973-02
Tout
5 Installation
7701838 - v.09 - 10122021 27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta Ace 160 - T Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta Ace 160 - T Control in the language / languages: English as an attachment in your email.

The manual is 3.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info