805749

Remeha Quinta Ace 160 - T Control Manual

22
Zoom out
Zoom in
Previous page
1/76
Next page
2. Fit the outlet pipe for CH water to the CH flow connection.
3. Remove the dust cap from the CH return connection at the
bottom of the boiler.
4. Fit the inlet pipe for CH water to the CH return connection.
5. For filling and tapping the boiler, install a filling and drain cock in the
CH return pipe.
6. Install the system pump in the CH return pipe.
See
For the electrical connection of the system pump: Connecting the
system pump, page 27
Important
Fit a service shut-off valve in the CH flow pipe and the CH return
pipe to facilitate servicing work.
Caution
When fitting service shut-off valves, position the filling and drain
valve, the expansion vessel and the safety valve between the
shut-off valve and the boiler.
If using plastic pipes, follow the manufacturer's (connection)
instructions.
5.2.2 Connecting the expansion vessel
1. Ensure that there is an expansion vessel with the correct volume and
pre-charge.
2. Fit the expansion vessel on the central heating return pipe .
5.2.3 Connecting the condensate drain pipe
The siphon is supplied separately with the boiler as standard (including a
flexible plastic drain hose and a transparent extension hose for the
automatic air vent). Fit these parts under the boiler.
1. Remove the dust cap from the siphon connection at the bottom of
the boiler.
2. Pull the retainer clip of the siphon sidewards.
3. Push the siphon firmly into the designated opening.
4. Push the retainer clip of the siphon forwards.
5. Check whether the siphon is firmly fitted in the boiler.
6. Fit a plastic drain pipe of Ø 32 mm or larger, terminating in the drain.
7. Attach the siphon hose supplied to the output of the siphon and insert
the other end into the plastic drain pipe.
8. Push the transparent hose supplied into the connecting grommet of
the automatic air vent and insert the other end into the plastic drain
pipe.
Fig.16 Connecting the CH return
AD-0000109-01
Fig.17 Connecting the condensate drain
AD-0000110-04
6
8
7
3
7
5
8
1
1
3
24
2
5 Installation
22 7701838 - v.09 - 10122021
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Quinta Ace 160 - T Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta Ace 160 - T Control in the language / languages: English as an attachment in your email.

The manual is 3.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info