Manual Remeha Quinta Ace 135 - T Control (page 47 of 76) (English)

805748

Zoom out

Zoom in

1/76

9.4 Disposal and recycling

Caution

Only qualified professionals are permitted to remove and dispose

of the boiler, in accordance with local and national regulations.

If you need to remove the boiler, proceed as follows:

1. Switch off the boiler.

2. Cut the power supply to the boiler.

3. Close the main gas valve.

4. Close the water mains.

5. Close the gas valve on the boiler.

6. Drain the installation.

7. Remove the air/flue gas pipes.

8. Disconnect all pipes.

9. Dismantle the boiler.

10 Troubleshooting

10.1 Error codes

The Quinta Ace is fitted with an electronic regulation and control unit. The

heart of the control is a e-Smart microprocessor, which controls and also

protects. In the event of an error, a corresponding code is displayed.

Tab.44 Error codes are displayed at three different levels

Code Type Description

A .00.00 (1) Warning The controls continue to operate, but the cause of the warning must be investigated. A

warning can change into a blocking or lock-out.

H .00.00 (1) Blocking The controls will stop normal operation, and will check with set intervals if the cause of

the blocking still exists.(2) Normal operation will resume when the cause of the blocking

has been rectified. A blocking can become a lock-out.

E .00.00 (1) Lock out The controls will stop normal operation. The cause of the lock-out must be rectified and

the controls must be reset manually.

(1) The first letter indicates the type of error.

(2) For some blocking errors, this checking interval is ten minutes. In those cases, it may seem that the controls do not start automatically.

Wait ten minutes before resetting.

The meaning of the code can be found in the various error code tables.

Important

The error code is needed to find the cause of the error quickly and

correctly and for any support from Remeha.

10.1.1 Display of error codes

When an error occurs in the installation, the control panel will show the

following:

1 The display will show a corresponding code and message.

2 The status LED of the control panel will show:

Continuous green = Normal operation

Flashing green = Warning

Continuous red = Blocking

Flashing red = Lock out

When an error occurs, proceed as follows:

1. Press and hold the button to reset the appliance.

The appliance starts up again.

Fig.58

MW-3000179-03

Fig.59 Error code display on HMI T-control

AD-3001379-01

Error Code: A.00.00

..... ... ....... .... .. ..... ....... .... ..... .......

........ .......

Home Screen22/02/2018 11:20

20/02/2018 16:51

.......... ......... .... ............ ........... ... ..... ....

...... ..... ......... ... ....... .......

.......... .........

... .........

10 Troubleshooting

7701838 - v.09 - 10122021 47

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Quinta Ace 135 - T Control in the language / languages: English as an attachment in your email.

The manual is 3.13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remeha Quinta Ace 135 - T Control Manual

Product: