443978
18
Zoom out
Zoom in
Previous page
1/40
Next page
Some settings can only be changed in the mode Extended
mode. The settings you create remain enabled in the
modes Basic mode and Normal mode.
4.3.5. Resetting factory settings
You can reset all settings, including the clock program, to the works
setting via: Menu > Settings > Users > Reset
4.3.6. Calibration
You can adjust the measuring value from the inside and outside
sensors via: Menu > Settings > Users > Calibration. This can be
useful if the measured temperatures do not correspond to what you
are used to.
Imagine that the measured temperature is 0,5℃ higher than what you
are used to. You can then enter an adjustment here of -0,5℃.
4.3.7. Restoring a connection with the base
station (Only controller RF)
When the controller RF or the base station is replaced, you must
restore the connection. To do this, proceed as follows:
1. Put the base station in connection mode. Consult the base station
manual for this.
2. Select in the controller: Menu > Settings > Users >
Connection > Base station.
After a few seconds, the connection is restored.
4.3.8. Connecting extra RF sensors (Only
controller RF)
1. Set the RF sensor to be connected to connection mode. (Refer to
the documentation for the relevant sensor).
2. In controller RF, select: Menu > Settings > Users >
Connection. Select the correct sensor and press connect. After
a few seconds, the connection is restored.
4.3.9. Setting the time and date
Set the correct date and time as follows: Menu > Settings > Date/
time.
4 Set time
4 Set date
4 Summer time:
Europe: The controller automatically switches between summer and
winter time.
4. Setting
iSense
17
030211 - 120666-AG
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha iSense at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha iSense in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha iSense

Remeha iSense User Manual - English - 39 pages

Remeha iSense User Manual - English - 168 pages

Remeha iSense Installation Guide - German - 40 pages

Remeha iSense User Manual - German - 168 pages

Remeha iSense Installation Guide - Dutch - 40 pages

Remeha iSense User Manual - Dutch - 168 pages

Remeha iSense User Manual - Dutch - 40 pages

Remeha iSense Installation Guide - French - 40 pages

Remeha iSense User Manual - French - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info