805733
60
Zoom out
Zoom in
Previous page
1/96
Next page
Tab.63 Factory settings at advanced installer level
Code Display text Description Adjustment range Subme
nu
285 355 430 500 575 650
AP002 Manual
Heat De
mand
Enable manual heat de
mand function
0 = Off
1 = With setpoint
Gas
fired ap
pliance
0 0 0 0 0 0
AP004 Hydr Valve
Wait Time
Heat generator wait time
to open the hydraulic valve
0 - 255 Sec Gas
fired ap
pliance
0 0 0 0 0 0
AP026 Setpoint
manual HD
Flow temperature setpoint
for manual heat demand
7 - 90 °C Gas
fired ap
pliance
40 40 40 40 40 40
AP063 Max CH
flow setpoint
Maximum central heating
flow temperature setpoint
20 - 90 °C Produc
er Ge
neric
Gas
fired ap
pliance
90 90 90 90 90 90
AP102 Boiler Pump
function
Configuration of the boiler
pump as zone pump or
system pump (feed low
loss header)
0 = No
1 = Yes
Gas
fired ap
pliance
0 0 0 0 0 0
CP010 Tflow set
point zone
Zone flow temperature
setpoint, used when the
zone is set to a fixed flow
setpoint.
7 - 90 °C CIRCA 90 90 90 90 90 90
CP290 ConfigZone
PumpOut
Configuration of Zone
Pump Output
0 = Zone output
1 = CH mode
2 = DHW mode
3 = Cooling mode
4 = Error report
5 = Burning
6 = Service flag
7 = System error
8 = DHW looping
9 = Primary pump
CIRCA 0 0 0 0 0 0
CP520 Zone Power
setpoint
Power setpoint per zone 0 - 100 % CIRCA 100 100 100 100 100 100
CP530 Zone PWM
Pump
speed
Pulse Width Modulation
pump speed per zone
20 - 100 % CIRCA 100 100 100 100 100 100
CP680 ConfPairing
RU Zone
Select the Bus channel of
the room unit for this zone
0 - 255 CIRCA 0 0 0 0 0 0
DP003 Abs. max
fan DHW
Maximum fan speed on
Domestic Hot Water
1000 - 7000 Rpm Gas
fired ap
pliance
5200 5500 3500 3800 4300 4100
DP010 Hysteresis
DHW
Temperature hysteresis
for the heat generator to
start on domestic hot wa
ter production
1 - 10 °C Gas
fired ap
pliance
5.5 5.5 5.5 5.5 5.5 5.5
DP011 Stop offset
DHW
Temperature offset to stop
heat generator on domes
tic hot water production
0 - 100 °C Gas
fired ap
pliance
5 5 5 5 5 5
DP020 Postrun
DHW
pump/3wv
Post run time of the DHW
pump/3 way valve after
DHW production
0 - 99 Sec Gas
fired ap
pliance
10 10 10 10 10 10
DP140 DHW load
type
DHW load type (0 : Combi,
1 : Solo)
0 = Combi
1 = Solo
Gas
fired ap
pliance
1 1 1 1 1 1
8 Settings
60 7734324 - v.06 - 01102021
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Gas 320 Ace at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 320 Ace in the language / languages: English as an attachment in your email.

The manual is 6.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Gas 320 Ace

Remeha Gas 320 Ace Usermanual and installation guide - German - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info