Manual Remeha Gas 310 Eco (page 10 of 20) (English, German, Dutch, French)

627780

Zoom out

Zoom in

1/20

Remeha

Gas 310/610 ECO

LAYOUT OF THE INSTRUMENT PANEL

fig. 03 Instrument panel

00.31H.79.00010

The Remeha Gas 310 ECO boiler is supplied with

an instrument panel. The Remeha 610 ECO is sup-

plied with an instrument panel on each boiler module.

This instrument panel is provided with an intelligent,

advanced boiler control (‘abc

’). Using the keys, differ-

ent menus can be accessed, various values can be read

and settings made. The instrument panel consists of the

following components:

1. On/off switch.

2. PC-connection.

3. Facility for incorporating a rematic

weather com-

pensator.

A. Code-display, indication of operating, setting, read-

out, shut-off, test and failure codes.

B. t-display, indication of temperatures, settings and

shut-off and lock-out codes.

C. Reset-key, to reset the boiler after a lockout.

D. m-key, key to select the required mode (mode-key).

E. s-key, key to select the required program within

the selected mode (step-key).

F. e-key, key to save the settings (store-key).

G. [+]-key, to select a higher setting.

H. [-]-key, to select a lower setting / switch function:

manual override (hand/auto).

The user has a number of setting options, which can

be evoked via the m-key. The desired code (see next

text block) can be chosen by pressing the m-key until

the digit ! (with dot) appears in the code-display. Now

choose the desired code by pressing the s-key. Next,

set the required value in the t-display, using the [+]-

and [-]-keys. Press the e-key to store the new value

(value will flash twice).

To gain access to the service level, the control system

requires an input code.

The boiler control has the following pre-set values:

! Flow temperature : 90°C

@ Pump run on time : 3 minutes

A Boiler control : 31 - modulating on flow

temperature without booster

function.

Settings should only be adjusted after consulting

your installer (or in case of emergency), see section

‘Setting mode at user level’ in our Technical Information.

Code reports in code-display

1 - only digit or letter; operating mode

! - digit or letter with dot; setting mode

! - digit or letter with flashing dot; read-out mode

b - letter b; shut-off mode (temporary, no boiler failure)

1 - digit flashes;failure mode

Operating mode (x [[)

During operation the code window shows the status

(operation) of the boiler, whereas the t window indi-

cates the measured boiler flow temperature.

Code Description

Stand-by; no heat demand

Vent (pre-ventilation time 12 seconds, post

ventilation time 3 seconds)

Ignite

The boiler is firing (flame detection)

Waiting; checking that there is sufficient air

transport using fan and air pressure differen-

tial switch (LDS)

Controls stop (burner off + post ventilation)

Run-on time, pump and fan

Shutdown mode

Gas leakage control

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 310 Eco in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Remeha Gas 310 Eco Manual

Product: