8437
21
Zoom out
Zoom in
Previous page
1/36
Next page
21
Fig. 15 Schematic construction of gas train, 7 and 9
sections
Fig. 16 Schematic constr. of gas train, 11 to 19 sections
Legend
A Gas cock (hand-operated)
MP Measuring point
F Gas filter
VA Safety valve
DR Gas governor
MB Multibloc
IT Ignition transformer
HB Main burner
FD Flame control
--- Not supplied as a standard feature.
7.4.2 Specification
Multibloc with gas/air ratio control consisting of:
- Gas filter (7 and 9 sections only)
- Two safety valves
- Pressure regulator for gas/air ratio.
7.4 Standard electronic gas train
7.4.1 Schematic construction
7.5 Functions
7.5.1 General
The equipment supplied ensures that the following func-
tions are monitored and locked or blocked in case
a failure has occured.
7.5.2 Flame protection (lock out)
Flame protection with two ionization probes.
7.5.3 Low-water protection
Low-water protection is ensured with three temperature
sensors: a flow temperature sensor, a return temperature
sensor and a water temperature sensor installed in the
boiler block at the most sensitive spot (heat exchange
temperature sensor).
The sensors monitor the rate of increase in water tempe-
rature and the differential temperature across the boiler.
If for instance one of the sensors signals a water tempe-
rature increase which is too rapid, the boiler will be shut
down.
If the differential temperature across the boiler exceeds
45°C, the boiler will go into a control stop.
7.5.4 Temperature protection
Water temperature protection is ensured with three water
temperature sensors: a flow temperature sensor, a return
temperature sensor and a water temperature sensor
installed in the boiler block at the sensitive spot (heat
exchanger temperature sensor).
If the flow sensor signals a temperature which exceeds
or threatens to exceed the preset maximum operating
temperature + 5°C (see para. 7.3.2), the boiler is
switched off (control stop).
At the same time the rate of increase in the water tempe-
rature is monitored, so that the boiler is switched off in
time and heat transfer is prevented.
If one of the sensors still signals a water temperature
higher than 110°C, the boiler will lock out.
The flue gas temperature is limited by a flue gas tempe-
rature sensor (locking) with a default setting of 230°C.
7.5.5 Flue gas transport protection
The flue gas transport is protected by a pressure
differential sensor.
VA2
VA1
VA2
VA1
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Gas 3002 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 3002 ECO in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Gas 3002 ECO

Remeha Gas 3002 ECO User Manual - German - 28 pages

Remeha Gas 3002 ECO Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info