805735
58
Zoom out
Zoom in
Previous page
1/92
Next page
9.3.3 Counters - FSB-WHB-HE-150-300
Tab.39 > FSB-WHB-HE-150-300 - Counters at user level
Code Description Range
AC001 Number of hours that the appliance has been on mains power 0 Hours - 65534 Hours
DC002 Numbers of Domestic Hot Water diverting valve cycles 0 - 4294967295
DC003 Number of hours during which the diverting valve is in DHW position 0 Hours - 4294967295 Hours
DC004 Number of burner starts for Domestic Hot Water 0 - 4294967295
DC005 Number of burning hours in Domestic Hot Water 0 Hours - 4294967295 Hours
PC003 Total number of burning hours. For heating and domestic hot water 0 Hours - 65534 Hours
Tab.40 > FSB-WHB-HE-150-300 - Counters at installer level
Code Description Range
DC001 Total power consumption used by Domestic Hot Water 0 kW - 4294967295 kW
PC002 Total number of burner starts. For heating and domestic hot water 0 - 65534
PC004 Number of burner flame loss 0 - 65534
9.3.4 Signals - FSB-WHB-HE-150-300
Tab.41 > FSB-WHB-HE-150-300 - Signals at user level
Code Description Range
AM001 Is the appliance currently in domestic hot water production mode? 0 = Off
1 = On
AM010 The current pump speed 0 % - 100 %
AM012 Current main status of the appliance. DeviceState
AM014 Current sub status of the appliance. DeviceSubStatus
AM015 Is the pump running? 0 = Inactive
1 = Active
AM016 Flow temperature of appliance. -25 °C - 150 °C
AM017 The temperature of heat exchanger -25 °C - 150 °C
AM018 Return temperature of appliance. The temperature of the water
entering the appliance.
-25 °C - 150 °C
AM019 Water pressure of the primary circuit. 0 bar - 25.5 bar
AM022 On / Off heat demand 0 = Off
1 = On
AM024 Actual relative power of the appliance 0 % - 655.35 %
AM027 Instantaneous outside temperature -60 °C - 60 °C
AM028 Value of the 0 to 10 Volt input. Meaning is dependant on the current
input function setting.
0 V - 25 V
AM037 Status of the three way valve 0 = CH
1 = DHW
AM040 Temperature used for hot water control algorithms. -25 °C - 150 °C
AM101 Internal system flow temperature setpoint 0 °C - 120 °C
AP078 Outside sensor detected in the application 0 = No
1 = Yes
GM001 Actual fan RPM 0 Rpm - 8500 Rpm
GM002 Actual fan RPM setpoint 0 Rpm - 8500 Rpm
GM006 Gas Pressure Switch status 0 = Open
1 = Closed
2 = Off
GM008 Actual flame current measured 0 µA - 25 µA
9 Settings
58 7665063 - v.05 - 18102018
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha Gas 220 Ace at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha Gas 220 Ace in the language / languages: English as an attachment in your email.

The manual is 9.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Remeha Gas 220 Ace

Remeha Gas 220 Ace Usermanual and installation guide - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info