805755

Remeha E-HP AW 88 Cool Ace B Manual

37
Zoom out
Zoom in
Previous page
1/44
Next page
See also
Accessing the heating side, page 35
9.2.2 Cleaning the heating circuit
Flush the condenser regularly with a flushing device. The heating water
can get contaminated by oxidation products, remainders of lubricants and
sealants. If these substances enter the heating circuit, they can reduce the
performance of the condenser in the device.
Danger
Always make sure that the device is disconnected from the power
supply before opening and cleaning the device.
Warning
Parts and fluids may be hot.
1. Connect the flushing device directly to the supply and return pipes of
the condenser of the heat pump.
2. Flush the condenser contrary to the direction of flow.
2.1. Install a filter to keep the heat exchanger clean and to avoid
failures.
3. Reattach the supply and return pipes, to both heat exchangers.
4. Make sure the water pressure in the system is at the required level.
5. Bleed all air from the system.
6. Install the side cover.
7. Install the screws to attach the side cover.
8. Turn the power back on.
See also
Accessing the heating side, page 35
9.2.3 Cleaning the air side
Caution
Always keep the air entry/suction area and air exhaust area free of
ice and snow, to make sure there is sufficient air volume.
Important
Clean the fans, evaporators and condensate drainage at the
beginning of each heating period.
Check the condensate collector regularly and clean it if
necessary, to guarantee proper draining.
Warning
Always make sure that the device is disconnected from the power
supply before opening and cleaning the device.
1. Remove the side cover of the air side.
2. Clean the inner side of the heat pump.
Caution
Do not use sharp or hard objects, to avoid damage to the
evaporator and the condensate pan.
3. Install the side cover.
4. Install the screws to attach the side cover.
5. Turn the power back on.
See also
Accessing the air side, page 36
9 Maintenance
7697291 - v.05 - 11032022 37
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha E-HP AW 88 Cool Ace B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha E-HP AW 88 Cool Ace B in the language / languages: English as an attachment in your email.

The manual is 12.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info