805754
36
Zoom out
Zoom in
Previous page
1/44
Next page
9.1.2 Accessing the air side
1. Remove the screws that attach the cover (1) to the device.
2. Remove the side cover (1).
9.2 Standard inspection and maintenance operations
Important
Maintenance must be performed by a qualified technician.
See also
Personnel qualification, page 5
9.2.1 Performing a leak test
Warning
Always make sure that the device is disconnected from the power
supply before opening and cleaning the device.
The leak test should be performed by qualified personnel only.
In accordance with the F-gas regulation, a yearly leak test must be
performed. If the heat pump is fitted with an automatic leak detection
device (available as accessory) the leak test interval frequency can be
decreased to once every 2 years.
1. Remove the side cover of the heating side.
2. Perform the leak test.
The amount of refrigerant can be found on the type plate.
3. Document the outcome of the leak test in the log.
Refer to the F-gas regulation for information on how long the
outcomes should be kept.
4. Install the side cover.
5. Tighten the screws to attach the side cover.
6. Turn the power back on.
Fig.27 Removing cover heating side of the
E-HP AW 44 / 88
AD-3001700-01
1
Fig.28 Removing cover heating side of the
E-HP AW 168
AD-3001701-01
1
11
1
1
1
9 Maintenance
36 7697291 - v.05 - 11032022
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Remeha E-HP AW 44 Cool Plus B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Remeha E-HP AW 44 Cool Plus B in the language / languages: English as an attachment in your email.

The manual is 12.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info