490489
17
Zoom out
Zoom in
Previous page
1/56
Next page


CD2 CUE2 SW/LED 18/18 57/18
CD2 CUE3 SW/LED 19/19 58/19
CD2 CUE4 SW/LED 1A/1A 59/1A
CD2 LOAD SW/LED 1B/1B 5A/1B
CD2 HP SW/LED 1C/1C 5B/1C
CH1 Level Meter LEVEL 1D 0~7
CH2 Level Meter LEVEL 1E 0~7
CD1 LOAD SW/LED 0D/0D 4C/0D
CD1 HP SW/LED 0E/0E 4D/0E
CD2 - SW/LED 0F/0F 4E/0F
CD2 + SW/LED 10/10 4F/10
CD2 Search SW/LED 11/11 50/11
CD2 Scratch SW/LED 12/12 51/12
CD2 LOOP SW/LED 13/13 52/13
CD2 RELOOP SW/LED 14/14 53/14
CD2 FX SEL SW/LED 15/15 54/15
CD2 FX ON SW/LED 16/16 55/16
CD2 CUE1 SW/LED 17/17 56/17

Control Change messages are sent with status 0xBn, where n is the channel, for the specied CC
controller. Thus the controller MIDI ID is indicated with the channel along with the CC number. The
value from 0x00 to 0x7F, directly related to the location of the controller.

Control Change messages are status 0xBn, where n is the channel, for the specied CC controller.
Thus the controller MIDI ID is indicated with the channel along with the CC number. The value from
0x40 to indicate the change in the controller. This is an offset to 0x40 “ones complement” notation.
A message with data 0x43 indicates a positive change of 3.
A messages with data 0x31 indicates a negative change of 15.

These messages are used for switches.
Control Change messages are sent with status 0x9n, SWITCH On and Off value are 0x7F and 0x00,
where n is the channel.

These messages are used for LED.
Control Change messages are sent with status 0x9n, LED On and Off value are 0x7F and 0x00,
where n is the channel.

Pitchbend messages are status 0xEn, where n is the channel, for the specied controller.
Thus the controller ID is indicated only by the channel.
For accurate changes, the 14 bit data in a pitch bend message is reserved for absolute controllers
which require more than 7 bits of data.

These messages are used for LEVEL.
Control Change messages are sent with status 0x9n, LED Off value is 0x00 and On value is related
to LED amount, 0x01 with one LED, 0x02 with two LED…., where n is the channel.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reloop MIXAGE Interface Edition MK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reloop MIXAGE Interface Edition MK2 in the language / languages: English, German, French as an attachment in your email.

The manual is 11,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info