490491
86
Zoom out
Zoom in
Previous page
1/89
Next page
FRANÇAIS
86
7.3 CONSEILS DE DÉPANNAGE
Si vous avez des problèmes lors de l‘utilisation de votre Reloop Jockey 3, consultez cette ressource
en premier recours pour dépanner :
Symptoms Possible Causes Corrective Measures
The device does not
receive any power when
turning it on via the ON/
OFF Button -B56-.
USB cord or mains ad-
apter are not correctly
connected.
Check whether the USB cord is cor-
rectly connected to a free USB port of
your computer and Jockey 3‘s USB port
-B69-. Please also check whether the
mains adapter is connected correctly to
the mains connection -B54-.
The Controller‘s LEDs are
only weakly lit and the
device does not react.
The power supply is not
sufcient.
Connect your computer to a secured
power line. Also it is necessary to con-
nect the included mains adapter to the
corresponding jack -B54-.
Not all outputs of the
integrated audio interface
can be selected in the DJ
software.
The ASIO driver is not
installed correctly.
Please install the ASIO driver again.
Also please read the paragraph „ASIO
Driver Installation“ in the chapter
„Computer Conguration“.
The audio interface‘s
sound is distorted.
The ASIO driver is not
used.
The performance set-
tings of your computer
do not correspond to the
computer‘s capacity.
Please make sure that the ASIO driver
is installed and is also being used. Ple-
ase refer to the paragraph „ASIO Driver
Installation“ in the chapter „Computer
Conguration“.
It is also possible that in the ASIO
driver‘s settings the available computer
capacity has to be re-congured. Open
the settings in Traktor, select the ca-
tegory „Audio Setup“ and click on the
„Setings“ button next to the sound card
selection window. Then select „Sys-
tem Performance“ 4 „Normal“. If the
problems persist you can also select
„Relaxed“ in the same menu.
The DJ software does
not show any reaction to
the usage of any of the
contoller's control ele-
ments.
Traktor LE is not congu-
red corectly.
Traktor Pro is not ins-
talled correctly.
If use the included Traktor LE version,
start the Setup Wizard again. Refer to
the paragraph „Traktor LE Setup“ in the
chapter „Computer Conguration“.
When using Traktor Pro the mapping
has to be loaded again. To do so follow
the instructions in the paragraph „Trak-
to Pro Conguration“ in the chapter
„Computer Conguration“.
The decks do not react to
the control elements of
the controller.
The Deck Select Swit-
ches are in the IN1/IN2
position.
Make sure that the Deck Select Swit-
ches are switched to the Traktor decks.
In analog mode the inputs
are not played via the
master output.
The two Input Switches
are not in the MIX posi-
tion.
Put both Input Switches to MIX positi-
on.
There is a problem that is
not listed here.
Various causes. Visit the website www.reloopdj.com/
forum in order to get support regarding
your Reloop products.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reloop JOCKEY III Master Edition at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reloop JOCKEY III Master Edition in the language / languages: English, German, French as an attachment in your email.

The manual is 12,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info