Reloop Beatmix disposes of two stereo outputs on the rear side. Master 1 -B31-, as well as Rec/Booth -B32- are available as RCA outputs. The
master volume can be adjusted via the volume Encoder -T23-. The Rec/Booth putput -B32- emits a constant volume.
Several adjustments and tests can be carried out with Beatmix without the help of a computer. In the following a few of these items are explained
in detail.
Reloop Beatmix offers the possibility to adjust the jog wheel sensitivity -B30- at the device‘s rear side. There are two dials; each one controls one
side of the controller. If the dial is in minimum position, the jog wheel will loose its scratching ability as now it is no longer touch-sensitive. If the
dial is in maximum position, a simple push on the jog wheel sufces to activate touch-sensitivity.
It is possible to update the Beatmix‘s rmware. This way changes can be carried out later and new features can be added. The latest rmware and
the Update Tool can be found under:
www.reloopdj.com/forum
T25
CUE-Mix Fading
With the Cue-Mix Fader a pre-mix can be simulated via headphones. In the right position
the master signal is audible, in the left position the CUE signal is audible.
T26
Track Navigation
By turning it is possible to browse in track view. By pressing playlist view can be enlarged.
Folder Navigation
By turning it is possible to browse in folder view. By
pressing you can open/close a folder.
T27
Linefader
With the linefader it is possible to adjust the channel volume.
T28
Crossfader
Fade between the decks via this fader.
1. Make sure that your Reloop Be-
atmix is connected to the com-
puter via USB.
2. Start the Beatmix Update Tool
and open the rmaware that ts
your device by clicking “Brow-
se”.
3. Carry out the rmware update
by clicking “Update”.
The new rmware will now be
transmitted to your device; this
may take a few minutes. When
the update has been carried out
successfully the message “Up-
date Complete” will appear.
4. Now close the Update Tool and disconnect the USB cord in order to
reboot your device.
1. Make sure that your Reloop Beat-
mix is connected to the computer
via USB.
2. Start the Beatmix Update Tool and
open the rmaware that ts your
device by clicking “Browse”.
3. Carry out the rmware update by
clicking “Update”.
The new rmware will now be trans-
mitted to your device; this may take
a few minutes. When the update has
been carried out successfully the
message “Update Complete” will
appear.
4. Now close the Update Tool and disconnect the USB cord in order to
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Reloop Beatmix at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Reloop Beatmix in the language / languages: English, German, French as an attachment in your email.
The manual is 1,81 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
