413312
8
Zoom out
Zoom in
Previous page
1/20
Next page
REL Acoustics ST 5 User Manual
8
Display of Memory Function
1
st
. memory position store. Press MEMORY the display will show Pr – (Profile)
Press LFE + button, the display will show Pr –1 and the settings
will be stored.
1
st
. memory position recall. Press MEMORY the display will show Pr – (Profile)
Press LFE - button, the display will show Pr 1 and the settings
will be recalled.
Repeat the above procedure for memory positions 2,3 and 4 using the HIGH LEVEL,
FREQUENCY and SLAM/DEPTH + and – buttons.
For memory position 2 display will show Pr –2 to store and Pr 2 to recall
For memory position 3 display will show Pr –3 to store and Pr 3 to recall
For memory position 4 display will show Pr –4 to store and Pr 4 to recall
CONTROL PANEL
DISPLAY ENCODER
All the functions shown on page 9 and 10 are available via the remote control and the
encoder on the front control panel.
When using the front control panel, the functions are accessed by sequential presses of the control
knob, the function being displayed on the two left hand digits of the seven-segment display. When the
required function is accessed, the value can be adjusted by rotating the control knob, the value being
displayed on the two right hand digits of the seven-segment display.
FACTORY DEFAULT SETTINGS
Before the MEMORY positions are programmed with the user’s preferences they are all pre
programmed with factory defaults as follows:-
LFE 30
HIGH LEVEL 30
FREQUENCY 30
SLAM/DEPTH 0
LFE MUTE Off
PHASE 0
DISPLAY TIMEOUT Off
DISPLAY BRIGHTNESS Max (10)
DC TRIGGER Hi
To reset factory defaults, switch off the unit by means of the rear mains ON/OFF switch.
Then switch back ON as you hold in the encoder knob on the control panel, continue to hold
the knob in until the decimal point on the right hand digit appears. You will now have reset to
the original factory defaults.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rel strata 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rel strata 5 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info