457182

Rel Serie R Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
U
sing the Low-Level Inputs
.1 Input: This requires a phono-to-phono cable and is a dedicated true .1 channel. This circuit therefore eliminates
the normal Natural RollOff Crossover and passes the .1 low-level signal through with only the required 120Hz 4th
o
rder crossover.
Low-Level Input: This single channel phono input allows for conventional connection to a preamplifier and should be
used in the rare event that a high-level connection proves incompatible. Connect as shown below. Plug one end into
the preamplifier output and the other into the low-level input on the sub-bass system. To obtain signal from both
channels requires purchase of a Y-adaptor that is available from most parts stores.
Phase Switch
Phase reversal can be useful as explained in “SETTING UP”.
PHASE SWITCH – Used to set phase
Position 0 / High-Level or LFE: 0 degrees phase
Position 180 / High-Level or LFE: 180 degrees phase
PHASE SELECTION AFFECTS BOTH HI AND LO LEVEL INPUTS
REL Set-Up Made Simple
REL products are not traditional subwoofers, but true Sub-Bass Systems. A REL is designed to augment the performance
of “full range” speaker systems, in order to provide, in certain cases, linear response down to below 12Hz. Therefore,
for the moment, set aside everything you’ve been taught about subwoofers and how they are integrated into a stereo
or home cinema system. REL Sub-Bass Systems set-up and positioning differs from conventional subwoofers. A REL
will take advantage of physics and room acoustics to provide deep pressurization as no traditional subwoofer can.
It’s important that you bring to the set-up process a willingness to do things a little differently in order to obtain these
superior results. The end result of your labours will be an utterly seamless integration of true deep bass to a sound
system, regardless of the main speakers’ low bass capability.
Basic set-up should take no more than ten to fifteen minutes to accomplish once connected.
Two Things Before You Begin
1 It is helpful to know that you will almost always connect the REL using the input on the rear panel labeled
“HIGH LEVEL INPUT.” This connection is made using the supplied 34’ 10” (10 meters) cable, the bare leads of
which connect to the speaker output terminals of the power amplifier. The easy and foolproof connection at the
REL is done with a Neutrik Speakon connector. The purpose of connecting to the speaker output terminals is
one of the unique secrets of REL’s success. By connecting to the high-level input on the REL from the amplifier,
you build forward the sonic signature of your main system, including the tonal balance and timing cues of the
entire electronics chain. In this way, the REL is fed the exact signal that is fed to the main speakers.
5
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rel Serie R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rel Serie R in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info