413709
12
Zoom out
Zoom in
Previous page
1/18
Next page
REL R-Series Owner’s Manual 13
Connecting
High-level connection, using the enclosed cable with the Neutrik Speakon
connector, is always the first choice. This connection can be made without
affecting the performance of the amplifier because the RELs amplifier input
impedance is 100,000 ohms, in effect not producing any additional demand
whatsoever on the rest of your system. This scheme also avoids adding any
detrimental effects by not interposing any additional electronics into the
amplification chain.
The standard high level hook up procedure is: attach the red wire to the
amplifier’s right positive speaker output terminal; attach the yellow wire to
the amplifier’s left positive speaker output terminal; attach the black wire to
whichever of the amplifier’s ground output terminals is convenient; plug the
Speakon connector into the Sub-Bass System’s high level input.
For differential (i.e. fully balanced) amplifiers using one REL, simply use
the standard connecting scheme with the exception of connecting the black
wire to chassis ground (i.e. a metal bolt or screw, preferably not painted or
anodized, on the chassis of the power amp or receiver), not to a negative
speaker terminal,, and then connecting into the HIGH LEVEL INPUT on the
REL. Please contact your dealer should there be any questions concerning
this or any other hookup procedure.
Low-level connection (via phono connectors) is always an option if high-level
connection is not possible. When connecting to the low-level inputs in a system
in which high-level connection is not possible, connect a single phono cable to the
LOW LEVEL INPUT jack. If you are connecting two channels of stereo output from a
pre-amplifier, simply use a high-quality y-adapter to sum the two signals together.
When connecting to a home cinema system where there is a .1/LFE channel
output, connect a single phono cable between the sub out of the processor/receiver
and the .1/LFE input jack on the REL.
Positioning
The optimal position for a REL is in one of the corners behind the main speakers. This
position provides 9 dB of mechanical amplification and allows for the most linear true
low bass wave launch, owing to the ability to tune the REL to the longest distance in
the room in order to produce the longest, therefore lowest, bass waves.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rel r-505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rel r-505 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rel r-505

Rel r-505 User Manual - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info