Manual Rel r-305 (page 6 of 12) (English)

413708

Zoom out

Zoom in

1/12

sing the Low-Level Inputs

.1 Input: This requires a phono-to-phono cable and is a dedicated true .1 channel. This circuit therefore eliminates

the normal Natural RollOff Crossover and passes the .1 low-level signal through with only the required 120Hz 4th

rder crossover.

Low-Level Input: This single channel phono input allows for conventional connection to a preamplifier and should be

used in the rare event that a high-level connection proves incompatible. Connect as shown below. Plug one end into

the preamplifier output and the other into the low-level input on the sub-bass system. To obtain signal from both

channels requires purchase of a Y-adaptor that is available from most parts stores.

Phase Switch

Phase reversal can be useful as explained in “SETTING UP”.

PHASE SWITCH – Used to set phase

Position 0 / High-Level or LFE: 0 degrees phase

Position 180 / High-Level or LFE: 180 degrees phase

PHASE SELECTION AFFECTS BOTH HI AND LO LEVEL INPUTS

REL Set-Up Made Simple

REL products are not traditional subwoofers, but true Sub-Bass Systems. A REL is designed to augment the performance

of “full range” speaker systems, in order to provide, in certain cases, linear response down to below 12Hz. Therefore,

for the moment, set aside everything you’ve been taught about subwoofers and how they are integrated into a stereo

or home cinema system. REL Sub-Bass Systems set-up and positioning differs from conventional subwoofers. A REL

will take advantage of physics and room acoustics to provide deep pressurization as no traditional subwoofer can.

It’s important that you bring to the set-up process a willingness to do things a little differently in order to obtain these

superior results. The end result of your labours will be an utterly seamless integration of true deep bass to a sound

system, regardless of the main speakers’ low bass capability.

Basic set-up should take no more than ten to fifteen minutes to accomplish once connected.

Two Things Before You Begin

1 It is helpful to know that you will almost always connect the REL using the input on the rear panel labeled

“HIGH LEVEL INPUT.” This connection is made using the supplied 34’ 10” (10 meters) cable, the bare leads of

which connect to the speaker output terminals of the power amplifier. The easy and foolproof connection at the

REL is done with a Neutrik Speakon connector. The purpose of connecting to the speaker output terminals is

one of the unique secrets of REL’s success. By connecting to the high-level input on the REL from the amplifier,

you build forward the sonic signature of your main system, including the tonal balance and timing cues of the

entire electronics chain. In this way, the REL is fed the exact signal that is fed to the main speakers.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rel r-305 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rel r-305

Rel r-305 User Manual - English - 18 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rel r-305 Manual

Product: