457180
8
Zoom out
Zoom in
Previous page
1/13
Next page
C
onnecting to the Power Amplifier Using the Neutrik High Level Input
To engage the Neutrik Speakon plug, insert fully into socket and rotate clockwise until locked.
T
o remove the Neutrik Speakon plug, grip body of plug, place thumb on chrome lever, move lever backwards rotate
plug anti-clockwise quarter turn and withdraw.
T
he high-level input is designed to accept the stereo (two-channel) signals from the speaker terminals of your receiver,
integrated amplifier, and basic amplifiers. This has the advantage of ensuring that your subwoofer receives exactly the
same signal as the main speakers, which means that the character of the bass from the main system is carried forward
into the Sub-Bass System. This is a very important point and together with RELs Natural RollOff™ circuitry, ensures
far superior system integration of the Sub-Bass System with the main system.
High-Level Input: Connections should be made to the same binding post on main amplifier as the main speakers.
Connect as shown above. Red to amplifier main right speaker red terminal, yellow to amplifier main left speaker red
terminal and black to amplifier main speaker black terminal, right or left but not both. Plug the Neutrik Speakon plug
into the HI LEVEL Neutrik socket.
Using the Low-Level Inputs
.1 Input: This requires a phono-to-phono cable and is a dedicated true .1 channel. This circuit therefore eliminates
the normal Natural RollOff Crossover and passes the .1 low-level signal through with only the required 120Hz 4th
order crossover. Connect as shown below. Single ended or balanced inputs available (single ended shown).
Low-Level Input: This stereo phono input allows for conventional connection to a preamplifier and should be used
in the rare event that a high-level connection proves incompatible. Connect as shown below. Plug one end into the
low-level output of the amplifier/processor and the other end into the stereo low-level inputs on the G1.
7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rel G 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rel G 1 in the language / languages: English as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info