Manual REL Acoustics Storm (page 5 of 13) (English)

601225

Zoom out

Zoom in

1/13

3. Connect the Mains lead to STORM and to the mains and switch ON.

To Connect to Bridged ( Monoblock) Amplifiers:

See Fig. 3

1. Connect to the amplifier using the Neutrik interconnect supplied with

Storm. Connect the RED and YELLOW cores to each of the positive

terminals of the amplifier, ( It does not matter which way around the

red and yellow are connected ). Connect the BLACK core to ground.

(See your amplifier manual for this ground connection)

Bridged Monoblocks

(One channel shown)

Amp 1 Left Speaker

+VE

(Left)

Red

Neutrik Speakon

0V Black Interconnect (Supplied)

To Storm Balanced Input

Yellow

(Right)

Right Speaker

Amp2 +VE

Fig.3

Note:-

Two Storm units are required with Monoblocks. Each Storm will

sense one channel only.

2. Plug the Neutrik plug into the balanced high level input of Storm.

3. Connect the Mains lead to STORM and to the mains and switch ON.

SETTING UP

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of REL Acoustics Storm in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

REL Acoustics Storm Manual

Product: