Manual REL Acoustics Stentor III (page 15 of 27) (English)

66881

Zoom out

Zoom in

1/27

REL Acoustics ‘ST III’ User Manual

To connect to the amplifier/processor using the phono to phono low

level interconnect

Two low level inputs are provided, 0dB and +12dB,

Connect as shown above using a phono to phono interconnect (not supplied). Plug one end

into the sub/LFE output on the amplifier/processor and the other end into the 0dB input on the

sub woofer.

If when using the 0dB input the output of the sub woofer is too low then use the +12dB input.

The output level is adjusted using the control marked LO LEVEL

If the low level connection is to be made to left and right pre-amp outputs then a 12dB

attenuator is available to balance the 0dB and +12dB phono inputs. See below.

Phono to Phono Interconnect.

(Not supplied) To sub/LFE output of

Amplifier/Processor

Sub Low Level

Input

Sub Low Level 12dB Phono to phono

Input Attenuator interconnect (Not supplied)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of REL Acoustics Stentor III in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

REL Acoustics Stentor III Manual

Product: