457183

REL Acoustics ST III Range Manual

12
Zoom out
Zoom in
Previous page
1/27
Next page
REL Acoustics ‘ST III’ User Manual
12
CONNECTING UP
Always switch off your system before disconnecting any wires
To increase the versatility of connecting up, the “ST” range has various separate inputs
depending on the model, see pages 9 and 10.
To connect to the power amplifier using the UNBALANCED Neutrik high
level input.
To engage the Neutrik Speakon plug, insert fully into socket and rotate clockwise until locked.
To remove the Neutrik Speakon plug, grip body of plug, place thumb on chrome lever, move
lever backwards rotate plug anti-clockwise (counter-clockwise in the US) quarter turn and
withdraw.
The high level input* is designed to accept the stereo (two channel) signals from the speaker
terminals of your receiver, integrated amplifier, and basic amplifiers. This has the advantage
of ensuring that your subwoofer receives exactly the same signal as the main speakers,
which means that the character of the bass from the main system is carried forward into the
sub-bass. This is a very important point and together with the REL’s ABC circuitry, ensures
far superior system integration of the sub-bass with the main system.
*This input is labeled “Unbal Hi Input” on Stentor III and Studio III. This is the most
common or standard recommended means of connecting the sub for two channel use.
Supplied Neutrik Speakon High level Interconnect
HI LEVEL input Release lever YELLOW + - + -
BLACK L R
RED
Amplifier main speaker outputs
High Level connections should be made to the same binding posts as the main
speakers
Connect as shown above. Red to amplifier main right speaker red terminal, yellow to
amplifier main left speaker red terminal and black to amplifier main speaker black terminal,
right or left but not both.
Plug the Neutrik Speakon plug into the HI LEVEL Neutrik socket.
The output level is adjusted using the control marked HI LEVEL.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REL Acoustics ST III Range at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REL Acoustics ST III Range in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info