601217

REL Acoustics Habitat1 Manual

14
Zoom out
Zoom in
Previous page
1/43
Next page
11
These connecons can be made on the Habitat1 through the REL Longbow™ transmier, or direct to the
back panel of the cabinet. In the case of connecng directly, only the subwoofer cabinet will need power.
Using input connecons to both the REL Longbow™ transmier and direct to the Habitat1 back panel are
not permied.
PHASE SWITCH: Used to set phase
Posion 0 / HIGH-LEVEL, LOW-LEVEL or LFE – 0 degrees phase
Posion 180 / HIGH-LEVEL, LOW-LEVEL or LFE – 180 degrees phase
PHASE SELECTION AFFECTS BOTH HIGH- AND LOW-LEVEL INPUTS: Crossover is always engaged for
HIGH-LEVEL INPUT. The .1/LFE signal does not pass through the crossover circuit.
Making Connecons
It is helpful to know that you will almost always connect the REL to the input on the rear panel labeled
“HIGH-LEVEL INPUT.” This connecon is made to the REL Longbow™ transmier using the supplied 6’ 6”
(2 meter) cable, the bare leads of which connect to the speaker output terminals of the power amplier.
The easy and foolproof connecon at the REL is done with a Neutrik Speakon connector. The purpose of
connecng to the speaker output terminals is one of the unique secrets of REL’s success. By connecng to
the high-level input on the REL from the amplier, you build forward the sonic signature of your main
system, including the tonal balance and ming cues of the enre electronics chain. In this way, the REL is
fed the exact signal that is fed to the main speakers. If the user prefers to connect the high level directly
to the Habitat1 subwoofer, please contact your dealer for a REL 34’ 10” (10 meter) cable with a right angle
Neutrik Speakon connector (PN NL4FRX) to t between the cabinet and the wall.
Connecng
HIGH-LEVEL connecon, using the enclosed cable with the Neutrik Speakon connector, is always the rst
choice. This connecon can be made without aecng the performance of the amplier because the REL’s
amplier input impedance is 150,000 ohms, in eect not producing any addional demand whatsoever on
the rest of your system.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REL Acoustics Habitat1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REL Acoustics Habitat1 in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info