682599
4
Zoom out
Zoom in
Previous page
1/17
Next page
03/2017 4/17 SERVER HD
Opening of the rollator
- Push the red button which is locking the seating tubes
- Hold both seat tubes and simultaneously push them down until you hear a
“click” sound of the locking mechanism of the frame. Try to pull the seat tubes
back up to fold the frame. If this is impossible to do the frame is opened and
secured correctly. See the OPEN position in the picture above.
After unfolding or assembling the rollator always ensure that the seat support is securely locked by the
pulling strip mechanism for securing the lock and that the frame does not move anymore.
Always ensure that both push handle tubes are securely locked in the main support tube with the two wing
knobs to prevent the accidental sliding in of the push handle tubes when forced.
Always test to see that accessories are properly and safely locked in place BEFORE using.
Failure to follow these warnings can result in personal injury.
Folding
- Lift the pulling strip on the seat up to fold the rollator.
- Fold the rollator until the lock closes.
Adjusting the height of the push handles
- Release the handle locking knob,
- Make adjustments to your desired height.
- Tighten the knob.
Both push handles should be adjusted to the same height.
The correctly adjusted handles should be to the height of the user’s hips.
Never leave the device without the breaks on.
Using the hand brakes
- TO STOP THE ROLLATOR simply pull the brake handles up towards the hand grips.
- TO REMAIN STATIONARY hold the brake handles in the ”UP” position.
- TO START MOVING release the brake handles. They will drop down automatically and the brakes will be
released.
You should always engage the breaks when you don’t plan to move the device.
Never leave the device without the breaks engaged when there is someone sitting in it!
Never leave the device on slopes without the breaks engaged!
Never sit to much to the rear. Do not to sit (partly) above the shopping bag.
Always sit straight up when seated on the rollatorwith your forearms or hands lightly resting on the push
handles.
Never lean backwards when seated on the rollator
Locking/Unlocking the hand brakes
- To lock the brakes push the brake handles down until you can hear the ”click” sound.
- To unlock the brakes pull the brake handles up until you feel them loosen.
When using the rollator in a stationary position, the hand brakes MUST always be locked.
7. Cleaning
General:
Clean the device regularly and keep it clean.
Lighter dirt and dust can be removed with a wet cloth.
Larger parts of dirt can be removed with a non-corroding, mild washing agent and warm water.
Do not use harsh abrasives or bleach based cleaners, as this may cause damage or discolouration.
Dry parts with a soft cloth.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rehasense Server HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rehasense Server HD in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info