POWER CONNECTION
Plug the AC power cord to a household outlet AC source. This unit
is equipped with a battery back up system, it requires a 3V CR2032
at lithium battery (not included). Insert the battery in the battery
compartment, making certain that the positive and negative (+ and
-) battery terminals are attached to the corresponding terminals on
the plate in the battery compartment. If an AC power failure occurs;
the clock and timer memory continue running. When the AC power
resumes, the clock switches back to AC again.
1. TIME AND CALENDAR SETTING
A. Setting Time and Calendar – Press mode set button (19) in normal
mode and keep depress over 2 seconds to enter time set mode,
after enter the setting mode, press mode set button (19) to change
the mode cycle as follows :
Normal g Year g Month g Day g 12/24 H g RTC Hour g RTC Min
g Normal
Action (during data adjustment) :
- Press << / MONTH-DAY / °C/°F BUTTON (17) to adjust data
backward.
- Press >> / YEAR / DST BUTTON (18) to adjust data forward.
- Keep depress << or >> button for 2 seconds to enable auto
forward.
B. Setting Alarm 1 and Alarm 2 – Press Alarm set button (16) during
normal mode and keep depress over 2 seconds to enter alarm
set mode, after enter the setting mode, press Alarm set button (16)
to change the mode cycle as follows :
Normal g AL 1 Hour g AL 1 Min g AL 1 weekend Alarm g AL 2 Hour
g AL 2 Min g AL 2 weekend alarm g Normal
