715743

Reer 50010 - Neo 200 Manual

10
Zoom out
Zoom in
Previous page
1/43
Next page
Warranty
Disposal instructions
Please retain your receipt, the user manual and item number.
Warranty claims or claims from promises of guarantee must be processed by the dealer.
The technical specication, information and characteristics of the product described
herein have been compiled to the best of our knowledge and belief and are correct at
the time of printing. Any information provided by reer should be correct and authoritative.
Nevertheless, reer does not accept liability for potential errors in this document and
reserves the right to make changes to the product design and/or specications without
prior notice. Reproduction and disclosure of information contained in this copyright-
protected document, in any form or by any means - graphical, electronic or mechanical by
photocopying, recording on tape or storage in a data retrieval system (even in part), require
prior written consent from reer.
At the end of its life, this product must not be disposed of as normal
domestic waste, but should be recycled at a collection point for electrical
appliances. Please see the relevant symbol on the product, in the user
manual and packaging. Materials can be recycled as specied. Do not put
used batteries into household waste. Instead they should be disposed of as
hazardous waste or with a battery collection station provided by the dealer. An important
contribution to the protection of the environment can be made by reusing the unit,
recycling its components or otherwise reusing old appliances. Please contact your local
council to nd out more about an appropriate disposal centre.
Troubleshooting
The status LED does not light up
Make sure that both units are switched on.
Check the connection of the mains adapter to the wall power socket and the unit.
Exchange the batteries and/or check the polarity.
Check the channel setting (A or B) of the transmitter and receiver.
The status LED flashes orange
The parent unit receives sounds. Turn up the volume on the parent unit to make sure
that you hear the sounds from your baby.
The status LED flashes red + alarm tone
The batteries are depleted. Replace the batteries or connect the unit to the power supply.
No sound transmission despite established connection
Check if the volume control button has been turned all the way down.
You can hear other wireless devices
As this baby monitor works with analogue radio technology, interference from other
wireless devices can occur. Change the channel.
A loud whistling tone sounds from the parent unit (feedback)
The baby unit is too close to the parent unit. Increase the distance between the baby
unit and the parent unit.
No connection between parent and baby unit / random noise / connection is lost
Make sure that both units are switched on.
Check the channel setting and/or change the channel.
The maximum range has been exceeded. Move the baby monitor to a different position
and/or reduce the distance between the baby and parent unit.
The baby/parent unit is close to interfering devices (e.g. microwave) or metal objects.
Try to find the source of interference and move the units to a different position.
The batteries are almost depleted. Replace the batteries or connect the units to the
power supply.
GB
1918
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Reer 50010 - Neo 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Reer 50010 - Neo 200 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info